1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ethernet card bad ?

Discussion in 'Hardware' started by wrangler2100, Feb 20, 2006.

  1. wrangler2100

    wrangler2100 Private First Class

    I have my sisters computer at my house was going to download some updates and a couple of other useful programs using my cable isp , she does not have internet right now, I plugged wire into ethernet slot but I cant get online . Keeps saying cannot find server. I went back thru the set up for it all and everything seems set up fine. my comp works fine. also she had dsl at her house and it would not connect to it either but no problems with a laptop . could ethernet card be bad ? I am also running a router . the computer is a compaq presario win xp home athlon xp 2600 , the cable modem and router are both lynksys any ideas ?
  2. Colemanguy

    Colemanguy MajorGeek

    Try this first, start run "inetwiz" then select connect using local area network, next, no then finish, see if that helps.
  3. wrangler2100

    wrangler2100 Private First Class

    thanks for replies, tried what colemanguy suggested still no luck.
  4. wrangler2100

    wrangler2100 Private First Class

    will try to pick one up tomorrow, also noticed that there is nowhere to connect a phone line for dial up , would the ethernet and phone use same connection , i know they are different sizes , just thought maybe phone goes in deeper for a different connection.
  5. wrangler2100

    wrangler2100 Private First Class

    tried a new card still not working
  6. ACE 256

    ACE 256 MajorGeeks Forum Administrator - Overclocking Expe

    Have you tryed a dif. cat5 cable ??? My freind has a router with a dead port.... all the ports blink and act normal but one wont connect........
  7. Wyatt_Earp

    Wyatt_Earp MajorGeek

    First thing you'll want to do is to take the router away. You'll need to see if you can get connected to the internet without it. I suggest you call your ISP. They won't help you set up the router, but they will help you get your single computer on the internet.

    Then from there, you'll need to follow the directions in the box with the router to the letter.
  8. wrangler2100

    wrangler2100 Private First Class

    my connection is fine cables are fine this computer is one I am working on it sets right beside my comp I can take the wire out of mine and plug into this one and it will not work then plug it back into mine and it works fine , no problem getting online, seems like a setting might be off or something , looked for firewalls but cant find any , the only thing is when i try to open the anti virus it will not open , gives me an error message that says it doesnt have all files it needs.
  9. ASUS

    ASUS MajorGeek

    Error messages, Post the exact message for help with that.

    Here's some Firewall info/settings Windows XP with SP2 has built in firewall:
    Understanding Windows firewall:
    Troubleshooting Windows firewall:

    Has this PC ever been online?

    How to configure a connection to the Internet in Windows XP Professional:

    Windows XP Internet Programs Cannot Connect to the Internet Through Broadband Connection:

    Connecting Your Home or Small Office Network to the Internet:
  10. Oh hey i think i have the solution. You can thank windows for giving you this hard time. If you run ipconfig and there are ip addresses listed, then windows is seeing the connection. What is going on is that maybe you have it disabled. Go to control panel, network and dialup connections and it should be listed there. It might be disabled so maybe you simply have to enable it in windows. That should take care of it. And no phone lines and ethernet lines are two totally different cables. If you want to connect the pc to a dialup internet connection you need to sign up with and isp and get a dialup modem which will accept a straight telephone line running into it. From there you can link up to the net with a dialup connection. Alot of AOL freebees at stores if you want to maybe try them but it is up to you.
    -the new tech guy
  11. wrangler2100

    wrangler2100 Private First Class

    yes it has been online before , using dial up and i have had it here on my cable. i tried plugging it straight from the modem , disconnecting my router, and still nothing . i tried to type in the ipconfig but nothing came up , a black box flashed on for a half a second and that was all , did a restore on it back to factory settings but still no better.i guess i will get a dial up modem to install and try using dial up
  12. Wavetar

    Wavetar Sergeant

    Don't type it in the "run" field, as that's what'll happen. Open a command prompt (ie: DOS window) and type "ipconfig /all" there, then it won't disappear on you. It should list your adaptor & ip addresses like in the pic I've attached. Let us know what yours shows.

    Attached Files:

  13. wrangler2100

    wrangler2100 Private First Class

    connection specific DNS suffix:
    autoconfigeration IP address
    subnet mast
    default gateway:
    that is what came up I checked settings in control panel and they are enabled
  14. Ok so that means the pc is seeing the netowork. Did you try loading the drivers for the network card?
    -the new tech guy
  15. shnerdly

    shnerdly MajorGeek

    I don't think your machine is getting it's address from the DHCP server. The address posted wouldn't have come from any domestic router I'm aware of. When your connected to your regular computer, what is the IP address?

    I only skimmed this thread and didn't see any reference to a firewall. If you have one on the troublesome machine , try turning it off for testing purposes
  16. Wyatt_Earp

    Wyatt_Earp MajorGeek

    Yeah, you probably have a static IP address set up rather than DHCP. It would also explain why your submet mask is and you have no default gateway.

    Open up My Computer and type in "My Network Places".
    Then click on "View Network Connections".
    Right Click->Properties on your Ethernet connection.
    Select "Internet Protocol (TCP/IP)" and select properties.
    Make sure "Obtain an IP Address Automatically" and "Obtain DNS Server Address Automatically" are selected. If either of them are not selected, then this is your problem.
  17. wrangler2100

    wrangler2100 Private First Class

    both settings are checked for auto and firewall is off , ip on the comp that works is
  18. Shang

    Shang Private E-2


    Those are your router's IP's.
  19. That means the netowork is being seen. So maybe a config is necessary which is where drivers come in. I say load them if availible and see if they help, also make sure your firewall on the router is disabled and turn off any running encryption as this could be what is going on.
    -the new tech guy
  20. shnerdly

    shnerdly MajorGeek

    The network is NOT being seen by the computer. Thats why it has the wrong IP address and subnet mask. This is NOT a driver issue.

    Set a static IP on the machine thats not working.

    Subnet Mask
    Default Gateway

    Primary DNS
    Secondary DNS leave blank

Share This Page

MajorGeeks.Com Menu

MajorGeeks.Com \ All In One Tweaks \ Android \ Anti-Malware \ Anti-Virus \ Appearance \ Backup \ Browsers \ CD\DVD\Blu-Ray \ Covert Ops \ Drive Utilities \ Drivers \ Graphics \ Internet Tools \ Multimedia \ Networking \ Office Tools \ NEW! PC Games \ System Tools \ Macintosh \ Demonews.Com \ Top Downloads

MajorGeeks.Com \ News (Tech) \ Off Base (Other Websites News) \ Way Off Base (Offbeat Stories and Pics)

Social: Facebook \ YouTube \ Twitter \ Tumblr \ Pintrest \ RSS Feeds