Game Server + Router - LAN

Hi,

I got a thread in the GAMES FORUM but no one replied. I think now that its best in this forum...

Anyways, whenever I create a Server in UT2004 using my BELKIN ADSL modem with built-in wireless router, people can't to connect to it. However, if I create a server using my Modem (supplied by my ISP) than people can connect - no problem.

The server with the router can only be accessed by me through the LAN...how can I get around this?

Any help is appreciated, Thanks

 

You need to setup your router so that people on the net can access it.

Set internal ip address on the server yourself.
192.168.1.110
then go on to your router and give access to that port .....UDP/TCP
DMZ server what ever IP number you set the server to.

Block WAN Request: disabled
Multicast Pass Through: enabled

PORT RANGE FORWARDING
Forwarding port range 0-max (unless you are using one port RTCW 27960)
Forwarding port range 27960-27960

Customized Applications.......Ext.Port.....Protocol...Protocol......IP Address
.........................................................TCP.........UDP
Game server........................0-0...........enable...................192.168.1.110 enable
Game server........................0-0..........................enable....192.168.1.110 enable

DYNAMIC ROUTING gateway

STATIC ROUTING
Static Routing:192.168.1.110 (Select Route entry)
Destination LAN IP: 192.168.1.110
Subnet Mask:255.255.255.0
Default Gateway: 192.168.1.1 (router default)
Hop Count 1
(Metric, max. is 15):
interface: LAN

DMZ HOST
DMZ Host IP Address: 192.168.1.110 (game server IP that you made)

That should do it

 

Thanks for the reply.

OK, I'm a noob so i'm going to need help understanding
I tried to follow the instruction but got stuck...btw, i've attached a pic of BELKINS page, could someone highlight the areas I need to go into please

I looked on UT to set an internal IP address but couldn't find anywhere to put and also do I use the same IP you posted? I couldn't find an option to give access to UDP/TCP. I found DMZ but havn't put an IP as of yet

I tried to do the settings like mentioned but I'm having trouble finding them...can someone direct me please. Thanks

Here is a pic of belkins page. Where do I look?

 

never used one of those .......working on your picture

 

Hey Beast, I appreciate your help but good news is that I got it sorted.

I decided to phone BELKIN Tech Support and they told me that I needed to open the port of the Game Server (UT2004) on the router. After, searching a while looking for the port number, I found it. And, all is good

Thanks again

 

Great after the first one it's easy

 

Thanks again