Now I have two ERUNT's

Hi!! Was reading a thread about ERUNT. It seemed I had a older version of ERUNT. I went to Majorgeeks and down loaded and installed the new ERUNT. Now I have two versions of ERUNT on my PC. I thought ERUNT would install over the top of my old one, but it didn't. Now I'm wondering should I uninstall the old one or just leave both; or should I uninstall both ERUNT's and start over with just the new one???confused
PS I just scheduled my old ERUNT to run once a week. Is this going to screw every thing up if I leave them both on my PC??

 

GUI = 'front end' not the program plus a new front end.

Always a good idea to check things out thoroughly before installing so you don't get any unexpected surprises.

 

Sorry I'm so stupid!! I'm not a geek, just a want to be. ERUNT has never given me any trouble and is trusted my millions so I didn't see a need to check it out thoroughly. I just assumed it would install over the top just like most up grades do, unless they tell you different, which is very rare . I'm not that familiar with GUI's. It looked like the program was installed twice to me sense I had two short cuts on my desktop and it was in my programs twice, but like I said I'm not a geek, just want to be some day.
I guess I'll just leave things alone and not worry about it.
Thanks for your reply!!

Hi!! I now know what a GUI or Gooey is!:-D
http://www.5min.com/Video/What-is-a-GUI-or-Gooey-270617052

 

It is good way for you uninstalling both of them helped by this software

http://www.revouninstaller.com/revo_uninstaller_free_download.html

after that you are able doing a clean installation of the programme !! :cool

 

Hi falconattack. That's for your reply!! Members here on Majorgeeks down load all our Apps. from Majorgeeks:-D
http://majorgeeks.com/Revo_Uninstaller_d5706.html

 

Sorry !! :-o

 

Hi!! It still looked to me that ERUNT was installed in two different places. I uninstalled my old one. Then I ran the registry Defrag with new one. Was told needed to reboot. My OS shut down and I received a warning that it was shutting down to protect my computer. Avira made a mindump. Will attach zip file. My PC seems to be OK now, but I'm not sure what happened. confused
Hoping someone has a answer!

 

No problem!

 

This is crazy!!

Hi!! Some day I want to be a real geek. I have a long way to go :-D
I tried to start a new thread about a mindump I got when using ERunt optimizer.
I tried to attach the zip file and my PC went crazy. Locked me out of Majorgeeks. I couldn't do any thing. I have never seen any thing like this. I will attach the link that I posted earlier and hope this helps some one figure out what the hell happened. I'm not crazy. Well maybe a little crazy. I was using manage attachments to add my zip file. I have never seen any thing like this. Every thing is cool now, but it was really crazy for awhile. It freaked me out!

http://forums.majorgeeks.com/showpost.php?p=1639935&postcount=7
I was trying to get a geek to post on the above link and help me, because my OS shut down, after using ERUNT optimizer and did a mindump. It was crazy for awhile. I'm ok now!! Majorgeeks is cool now. I'm hoping some thing was recorded and will explain what happened. I know this is not the place to post, but it can be moved. I don't know how to tie my threads together. I'm hoping this makes sense to some one ?????

 

Microsoft (R) Windows Debugger Version 6.9.0003.113 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Documents and Settings\My Documents\Downloads\Mini062711-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: srv*c:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 3) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 2600.xpsp_sp3_gdr.101209-1647
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055b240
Debug session time: Mon Jun 27 20:40:20.640 2011 (GMT-4)
System Uptime: 0 days 0:02:03.203
Loading Kernel Symbols
....................................................................................................................
Loading User Symbols
Loading unloaded module list
.........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {c0000005, 8058814e, edf87b5c, 0}

Probably caused by : ntoskrnl.exe ( nt!CcPfPrefetchSections+206 )

Followup: MachineOwner
---------

kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 8058814e, The address that the exception occurred at
Arg3: edf87b5c, Trap Frame
Arg4: 00000000

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".

FAULTING_IP:
nt!CcPfPrefetchSections+206
8058814e 8b30 mov esi,dword ptr [eax]

TRAP_FRAME: edf87b5c -- (.trap 0xffffffffedf87b5c)
ErrCode = 00000000
eax=71c7ed54 ebx=85d72218 ecx=00000015 edx=00000009 esi=0c100201 edi=00000001
eip=8058814e esp=edf87bd0 ebp=edf87c48 iopl=0 nv up ei pl zr na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010246
nt!CcPfPrefetchSections+0x206:
8058814e 8b30 mov esi,dword ptr [eax] ds:0023:71c7ed54=????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: DRIVER_FAULT

BUGCHECK_STR: 0x8E

PROCESS_NAME: avwsc.exe

LAST_CONTROL_TRANSFER: from 805877d3 to 8058814e

STACK_TEXT:
edf87c48 805877d3 edf87c70 01000000 00000000 nt!CcPfPrefetchSections+0x206
edf87c88 8058764f e107d000 00080000 85915800 nt!CcPfPrefetchScenario+0x7b
edf87d04 805828ce 85915800 e23cf3c0 00000000 nt!CcPfBeginAppLaunch+0x158
edf87d50 804f88fa 00000000 7c810705 00000001 nt!PspUserThreadStartup+0xeb
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16


STACK_COMMAND: kb

FOLLOWUP_IP:
nt!CcPfPrefetchSections+206
8058814e 8b30 mov esi,dword ptr [eax]

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: nt!CcPfPrefetchSections+206

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntoskrnl.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 4d00dbda

FAILURE_BUCKET_ID: 0x8E_nt!CcPfPrefetchSections+206

BUCKET_ID: 0x8E_nt!CcPfPrefetchSections+206

Followup: MachineOwner
---------

kd> .trap 0xffffffffedf87b5c
ErrCode = 00000000
eax=71c7ed54 ebx=85d72218 ecx=00000015 edx=00000009 esi=0c100201 edi=00000001
eip=8058814e esp=edf87bd0 ebp=edf87c48 iopl=0 nv up ei pl zr na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010246
nt!CcPfPrefetchSections+0x206:
8058814e 8b30 mov esi,dword ptr [eax] ds:0023:71c7ed54=????????
kd> lmvm nt
start end module name
804d7000 806ee580 nt # (pdb symbols) c:\Symbols\ntoskrnl.pdb\E3C437143F16490BAF598271D5EFBEDF2\ntoskrnl.pdb
Loaded symbol image file: ntoskrnl.exe
Mapped memory image file: c:\Symbols\ntoskrnl.exe\4D00DBDA217580\ntoskrnl.exe
Image path: ntoskrnl.exe
Image name: ntoskrnl.exe
Timestamp: Thu Dec 09 08:38:34 2010 (4D00DBDA)
CheckSum: 0022638E
ImageSize: 00217580
File version: 5.1.2600.6055
Product version: 5.1.2600.6055
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 1.0 App
File date: 00000000.00000000
Translations: 0411.04b0
CompanyName: Microsoft Corporation
ProductName: Microsoft(R) Windows(R) Operating System
InternalName: ntoskrnl.exe
OriginalFilename: ntoskrnl.exe
ProductVersion: 5.1.2600.6055
FileVersion: 5.1.2600.6055 (xpsp_sp3_gdr.101209-1647)
FileDescription: NT Kernel & System
LegalCopyright: (C) Microsoft Corporation. All rights reserved.

 

Hi! mimon!! I have no clue what your trying to tell me. I'm just a newbie in the computer world. I just know my PC was acting strange , but now every thing is cool. I wanted to report all this to Majorgeeks and hope it would help someone figure out what's going on.
Thank you!!
PS I have started another thread ( This is crazy) I'm hoping this all ties together and helps Majorgeeks. I don't have a clue??? I hope I haven't broken any rules. My PC was going crazy and I couldn't even log onto Majorgeeks. I was thinking I broke the rules and was being locked out. Every thing is cool now. Wheew!!

 

Yes it was Avira. Were you using NTREGOPT to optimise the registry?
Well the detailed info does not mention to shut down apps or disable the AV, real time anti-spyware, maybe it's considered understood.

Used both ERUNT and NTREGOPT ages ago, don't recall disabling anything! On a Mac right now so can't give it a run.

Here's a link that advises to shut down running apps and I quote.

Maybe mjnc can jump in here, as he is a regular user.

Yes in the Lounge.
You're gonna get wupped now. :-D

Cheers..

 

Yes. you should certainly shut down All running applications before running NTREGOPT, since they could write
to the registry while running or when shutting down.
Also, make sure that no Automatic Updates are processing before running NTREGOPT.

Don't think it's necessary to disable antivirus and such - I never have and it hasn't caused any problems that I'm aware of,
although it might be beneficial.
Besides, if I was going to disable those things, I would first disable the network internet connection.

Remember, you need to Reboot Immediately after running the optimization, so you want all Apps closed anyway.

 

Hi please don't wupp me.:-D:-D
I don't remember if any thing was running. I have been using NTREGOPT to optimize my registry for a long time. I had installed the new ERUNT GIF thinking it would install over the top, but it didn't and so I had two ERUNT's. I uninstalled the old ERUNT and wanted to see if the new one would work. I used NTREGOPT and said yes when it asked to restart. That's when my OS shut down and Avira made the mindump file. I zipped the file and attached it in this thread. I thought I should make a new thread and attach it there also. The forum went crazy and locked me out for a long time after I tried to attach the zip in a new thread. I thought I had broken some rules. I have never seen any thing like that before. I thought I should report what happened. Every thing is ok now???? I will try to answer any questions you have!!
Thank you!

 

Hi!! OK. Thank you!. I just want everyone to know that I'm reporting two different things. The first was a mindump by Avira when using NTREGOPT. The second was Majorgeeks forum locking me out when I tried to attach a zip file of the mindump. I know you can't upload the same jpg twice. You get the message that the jpg has already been uploaded. I didn't get that message when I tried to upload the same zip file. It just locked me out of the forum and went crazy for a long time. I hope I'm explaining this well.:confused
Anyway every thing is OK now and I'm back to normal. I did another optimize with NTREGOPT and no problems this time?????? Computers are weird and will drive you crazy. I'm going to start a thread in the lounge about "What is the weirdest thing your PC has done to you"? What do you think Laura;would that be a fun thread?:-D Things wouldn't have to always be true. You could make up silly things too along with true things.
Thank you friend!