1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

OTLPE - Installed to a USB drive

Discussion in 'Malware Removal FAQ' started by chaslang, May 31, 2010.

  1. chaslang

    chaslang MajorGeeks Admin - Master Malware Expert Staff Member

    Installing OTLPE on a Flashdrive

    In the below instructions, double click on the thumbnail images to expand into a viewable format.

    You will need a flash drive with a size of 2 GB or larger. Make sure that you do not leave anything important on the flash drive, because all data on it will be deleted during the following steps.

    • Download OTLPEStd.exe from one of the following links and save it to your Desktop: mirror1 Currently this file is a little less than 100Mb in size so it can take awhile to download.
    • Download eeepcfr.zip from the following link and save it to your Desktop: the mirror
    • Finally, if you do not have a file archiver like 7-zip or Winrar installed, please download 7-zip from the following link and install it: 7Zip
    • Once you have 7-zip install, decompress OTLPEStd.exe by rightclicking on the folder and choosing the options shown in the picture below. Please use the suggested folder name as in the example ( OTLPEStd) which will be created on your Desktkop.
    • Open the folder OTLPEStd which was created on your Desktop ( or in the same location as OTLPEStd.exe if you did not put it on your Desktop ) and right-click OTLPE_New_Std.iso. Select 7-Zip and from the submenu select Extract files... like the below snapshot illustrates. and extract the content onto your Desktop in a OTLPE folder:

    • And extract the content onto your Desktop in a folder name OTLPE similar to what is illustrated below:

    • Now in a similar fashion, please use 7-Zip to also decompress eeepcfr.zip but this time decompress it to your systemroot (usually C:\). This will thus create a C:\eeepcfr folder in the root of your Windows boot drive.
    • Empty the flash drive you want to install OTLPE on.
    • Go to C:\eeecpfr and double-click usb_prep8.cmd to launch it.
    • Press any key when asked to in the black window that opens.
    • Set the options as indicated in the below but replace charlie with your user name. Also where the image shows No USB Disks Found! make sure that the USB drive you will be formatting/erasing is selected. I repeat make sure you have selected the correct flash drive, before proceeding.
      For Drive Label: type in OTLPE.
      Under Source Path to built BartPE/WinPE Files click ... and select the folder OTLPE that you created on your Desktop.
      Finally check Enable File Copy.

    • Click on Start, accept the disclaimers and wait for the program to finish.
    • When it finishes, your bootable flash drive should now be ready for use.
    Last edited: Nov 22, 2011

Share This Page

MajorGeeks.Com Menu

MajorGeeks.Com \ All In One Tweaks \ Android \ Anti-Malware \ Anti-Virus \ Appearance \ Backup \ Browsers \ CD\DVD\Blu-Ray \ Covert Ops \ Drive Utilities \ Drivers \ Graphics \ Internet Tools \ Multimedia \ Networking \ Office Tools \ NEW! PC Games \ System Tools \ Macintosh \ Demonews.Com \ Top Downloads

MajorGeeks.Com \ News (Tech) \ Off Base (Other Websites News) \ Way Off Base (Offbeat Stories and Pics)

Social: Facebook \ YouTube \ Twitter \ Tumblr \ Pintrest \ RSS Feeds