Realtek HD version 1.67 code 10

Hi,
Need help with my realtek. Have tried all poss options of removing UAA drivers and installing Realtek and vice versa following most of the threads from previous post here.Nohing worked and its been almost two weeks am stuck with no sound and no sound icon on my system tray.Have tried disabling and enabling in BIOS, reisntalled drivers and restarted and reformatted a lot of times using system restore.Ran cc cleaner after each uninstall and reinstalling.Nothing worked so far. Have gone into regedit and removed the K88111 AND REINSTALLED ..when everythings ready relatek shows in Yellow exclamation mark and this device cannot start up code 10.Tried almost everything..All i get back is to square one with no sound in my system.A real tick off and almost losing my patience. Any help would be helpful.
Realtek High Definition Audio shows up in the list of installed hardware with a yellow circle and an " ! " inside that circle.
Running out of ideas..nothings worked..mines Realtek HD version 1.67

"This device cannot start. (Code 10)"

I've tried uninstalling it from my device manager, and doing the Add Hardware thing again....

"Found New Hardware.... Realtek High Definition Audio."

"A problem occured during hardware installation. Your new hardware might not work properly."

Again, Realtek High Definition Audio shows up in the list at the end of the wizard with a yellow circle and an " ! " inside that circle.

My Details using belarc are:

My Motherboard is :N73V/N73PV Motherborad NF-7050 Nvidia MCP-73.
CHIPSET:MCP73V:GeForce 7050/nForce 610i(N73V)
MCP73PV:GeForce 7100/nForce 630i(N73PV)
Audio:7.1 channl audio codec Realtek ALC883.

click for Belarc's System Management products

Operating System System Model
Windows XP Professional Service Pack 2 (build 2600)
Install Language: English (United States)
System Locale: English (United States) Enclosure Type: Desktop
Processor a Main Circuit Board b
2.00 gigahertz Intel Pentium Dual
64 kilobyte primary memory cache
1024 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threaded Bus Clock: 200 megahertz
BIOS: American Megatrends Inc. 080015 03/29/2008
Drives Memory Modules c,d
32.51 Gigabytes Usable Hard Drive Capacity
27.71 Gigabytes Hard Drive Free Space

HL-DT-ST DVD-RAM GH22NP20 [Optical drive]
3.5" format removeable media [Floppy drive]

WDC WD800BD-22MRA1 [Hard drive] (80.03 GB) -- drive 0, s/n WD-WMAM9CEU4078, rev 10.01E01, SMART Status: Healthy 896 Megabytes Usable Installed Memory

Slot 'DIMM0' has 1024 MB
Slot 'DIMM1' is Empty
Slot 'DIMM2' is Empty
Slot 'DIMM3' is Empty
Local Drive Volumes

c: (NTFS on drive 0) 32.51 GB 27.71 GB free

Network Drives
None discovered
Users (mouse over user name for details) Printers
local user accounts last logon
sam marak 10/25/2010 11:58:48 AM (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never


Marks a disabled account; Marks a locked account None discovered
Controllers Display
Standard floppy disk controller
Primary IDE Channel [Controller] (2x)
Secondary IDE Channel [Controller] (2x)
Standard Dual Channel PCI IDE Controller (2x) NVIDIA GeForce 7050 / NVIDIA nForce 610i [Display adapter]
Proview 15.7 [Monitor] (15.7"vis, s/n 109121213181, October 2006)
Bus Adapters Multimedia
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller Realtek High Definition Audio
Virus Protection [Back to Top] new Group Policies
No details available None discovered
Communications Other Devices

NVIDIA nForce Networking Controller
primary Auto IP Address: 192.168.1.2 / 24
Gateway: 192.168.1.1
Dhcp Server: 192.168.1.1
Physical Address: 00:1B:22:06:C9:A7

Networking Dns Server: 192.168.1.1
HID-compliant consumer control device
HID-compliant device (3x)
USB Human Interface Device (3x)
HID Keyboard Device
HID-compliant mouse (2x)
Microsoft PS/2 Mouse
NVIDIA Network Bus Enumerator
USB Composite Device
USB Root Hub (2x)

 

Greetings, sam_lithium.

Don't know if you've seen it yet, but here's the MS Code-10 article: KB943104.

Any reason for not updating to SP3? There has been a spate of Realtek issues in the forums lately, and SP3 has helped some of them.

For what it's worth: I've never spent 2 weeks on an onboard audio problem - a cheap PCI sound card does wonders.

 

Did go through it..didnt work when i tried the update thing..same error

 

Well!! got the best solution..changed my soundcard and now my sound works fine :-D ^_^..DONE!!!!

 

Good job - glad you got it. :major