SAS No internet, fix didn't work

I suspect you may have a zero access infection. There are alot of steps I want you to carry out now so just take your time and go careful.

Download and run Win32kDiag per the below instructions:

• Download this Win32kDiag and save to C:\Win32kDiag.exe. You must save it here!!!!
• Click on Start->Run, and copy-paste the following command (the bolded text) into the "Open" box, and click OK. When it's finished, there will be a log called Win32kDiag.txt on your desktop. Please attach this log

C:\win32kdiag.exe -f -r


Now we need to scan the system with this special tool.

• Please download Junction.zip and save it to your root folder (C:\Junction.zip)
• Unzip it and put junction.exe in the root folder (C:\junction.exe)
• Now click Start => Run... => Copy and paste the following command in the run box and click OK:
  
  cmd /c junction -s c:\ >C:\log.txt
  ​
• A command prompt window opens and also a license agreement from SysInternals will appear.
• Accept the license agreement and the scan will begin.
• Wait until a log file opens. Attach this C:\log.txt when it finishes (the command prompt window will close when it finishes). (How to attach items to your post)
• NOTE: It scans your whole hard disk so if can take a long time. Be patient and don't do anything else while it is scanning.

And one more scanning tool I want to use to collect more information is OTL per the below.

Please download OTL by Old Timer to your desktop.
See the download links under this icon:

1. Double-click OTL.exe to run (Vista and Win7 right click and select Run as Administrator)
2. When OTL opens, change the Output (at the top-right portion of the program) to Minimal Output.
3. Put check-marks in LOP Check and Purity Check.
4. Now click the button.

• When the scan is complete, two logs entitled OTL.txt and Extras.txt will be created on your desktop.
• Attach both of these logs to your next message as well as any other requested logs.

I want you to run TDSSKiller so refer to the below for how to do so.

TDSSkiller - How to run


Please also download MBRCheck to your desktop

• Double click MBRCheck.exe to run (vista and Win 7 right click and select Run as Administrator)
• It will show a Black screen with some information that will contain either the below line if no problem is found:
  • Done! Press ENTER to exit...
• Or you will see more information like below if a problem is found:
  • Found non-standard or infected MBR.
  • Enter 'Y' and hit ENTER for more options, or 'N' to exit:
• Either way, just choose to exit the program at this point since we want to see only the scan results to begin with.
• MBRCheck will create a log named similar to MBRCheck_07.16.10_00.32.33.txt which is random based on date and time.
• Attach this log to your next message. (See: HOW TO: Attach Items To Your Post )

Now make your way through as much of these procedures as possible, and attach the requested logs. (From Malware Bytes, rootrepeal, unless on 64 bit, Combofix and MGTools.)

Please read ALL of this message including the notes before doing anything.

Pleases follow the instructions in the below link:

READ & RUN ME FIRST. Malware Removal Guide


and attach the requested logs when you finish these instructions.

• **** If something does not run, write down the info to explain to us later but keep on going. ****
• Do not assume that because one step does not work that they all will not. MGtools will frequently run even when all other tools will not.

• After completing the READ & RUN ME and attaching your logs, make sure that you tell us what problems still remain ( if any still do )!

Helpful Notes:

1. If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:
   
   • Starting your computer in Safe mode
2. If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware and Malwarebytes ( links are given in the READ & RUN ME) onto another PC and then burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.
3. If you cannot seem to login to an infected user account, try using a different user account (if you have one) in either normal or safe boot mode and running only SUPERAntiSpyware and Malwarebytes while logged into this other user account. Then reboot and see if you can log into the problem user account. If you can then run SUPERAntiSpyware, Malwarebytes, ComboFix and MGtools on the infected account as requested in the instructions.
4. To avoid additional delay in getting a response, it is strongly advised that after completing the READ & RUN ME you also read this sticky:
   • Don't Bump! It Only Hurts You!!!

Any additional post is a bump which will add more delay. Once you attach the logs, your thread will be in the work queue and as stated our system works the oldest threads FIRST.
​