windows 7 mouse cursor moves on its own

This problem is most likely a software issue, but in order for us to thoroughly check for malware first, you will need to follow the below procedures.

Please read ALL of this message including the notes before doing anything.

Please follow the instructions in the below link:

READ & RUN ME FIRST. Malware Removal Guide


and attach the requested logs when you finish these instructions.

• **** If something does not run, write down the info to explain to us later but keep on going. ****
• Do not assume that because one step does not work that they all will not. MGtools will frequently run even when all other tools will not.

• After completing the READ & RUN ME and attaching your logs, make sure that you tell us what problems still remain ( if any still do )!

Helpful Notes:

1. If you run into problems trying to run the READ & RUN ME or any of the scans in normal boot mode, you can run the steps in safe boot mode but make sure you tell us what you did later when you post logs. See the below if you do not know how to boot in safe mode:
   
   • Starting your computer in Safe mode
2. If you have problems downloading on the problem PC, download the tools and the manual updates for SUPERAntiSpyware and Malwarebytes ( links are given in the READ & RUN ME) onto another PC and then burn to a CD. Then copy them to the problem PC. You will have to skip getting updates if (and only if) your internet connection does not work. Yes you could use a flash drive too but flash drives are writeable and infections can spread to them.
3. If you cannot seem to login to an infected user account, try using a different user account (if you have one) in either normal or safe boot mode and running only SUPERAntiSpyware and Malwarebytes while logged into this other user account. Then reboot and see if you can log into the problem user account. If you can then run SUPERAntiSpyware, Malwarebytes, ComboFix and MGtools on the infected account as requested in the instructions.
4. To avoid additional delay in getting a response, it is strongly advised that after completing the READ & RUN ME you also read this sticky:
   • Don't Bump! It Only Hurts You!!!

Any additional post is a bump which will add more delay. Once you attach the logs, your thread will be in the work queue and as stated our system works the oldest threads FIRST.
​

 

Yes and no. Impossible to tell without my seeing the requested logs.

 

Why did you not run Combofix?

 

Delete this folder:
C:\Windows\CD95F661A5C411AFB2CCABCD21A325B8.TMP

Delete these files.:
C:\Windows\SysNative\SET1585.tmp
C:\Windows\SysNative\SET1CAE.tmp
C:\Windows\SysNative\SET2B2B.tmp
C:\Windows\SysNative\SETB3A7.tmp
C:\Windows\SysNative\SETBBF7.tmp
C:\Windows\SysNative\SETF49E.tmp
C:\Windows\SysNative\SETFA58.tmp
C:\Windows\SysWOW64\SET1033.tmp
C:\Windows\SysWOW64\SET2F6.tmp
C:\Windows\SysWOW64\SET577.tmp

If you are not having any other malware problems, it is time to do our final steps:

1. We recommend you keep SUPERAntiSpyware and Malwarebytes Anti-Malware for scanning/removal of malware. Unless you purchase them, they provide no protection. They do not use any significant amount of resources ( except a little disk space ) until you run a scan.
2. If we had you use ComboFix, uninstall ComboFix (This uninstall will only work as written if you installed ComboFix on your Desktop like we requested.)
   • Click START then RUN and enter the below into the run box and then click OK. Note the quotes are required (If we renamed it please rename it back to Combofix.exe.
   • "%userprofile%\Desktop\combofix" /uninstall
     • Notes: The space between the combofix" and the /uninstall, it must be there.
     • This will uninstall ComboFix and also reset hidden files and folders settings back to Windows defaults.
3. Go back to step 6 of the READ ME and renable your Disk Emulation software with Defogger if you had disabled it.
4. Any other miscellaneous tools we may have had you install or download can be uninstalled and deleted.
5. If we had you download any registry patches like fixme.reg or fixWLK.reg (or any others), you can delete these files now.
6. If running Vista, it is time to make sure you have reenabled UAC by double clicking on the C:\MGtools\enableUAC.reg file and allowing it to be added to the registry.
7. Go to add/remove programs and uninstall HijackThis.
8. Goto the C:\MGtools folder and find the MGclean.bat file. Double click on this file to run this cleanup program that will remove files and folders
   related to MGtools and some other items from our cleaning procedures.
9. If you are running Win 7, Vista, Windows XP or Windows ME, do the below:
   • Refer to the cleaning procedures pointed to by step 7 of the READ ME
     for your Window version and see the instructions to Disable System Restore which will flush your Restore Points.
   • Then reboot and Enable System Restore to create a new clean Restore Point.
10. After doing the above, you should work thru the below link:
    • How to Protect yourself from malware!

You can post about the cursor in the software forum.

 

They must already be gone. Don't worry.

 

It needs to be directly ON your desktop, not in a folder on your desktop.

 

If we used ComboFix, you can delete the

* ComboFix.exe file
* C:\ComboFix folder
* C:\QooBox folder
* C:\WINDOWS\nircmd.exe
* C:\combofix.txt
* C:\ComboFix-quarantined-files.txt logs that was created.

 

What windows to run what automatically? :confused

 

That is just the Recovery Console that was installed when you ran Combofix. This is very useful to have and a wise idea to keep it.

No, we don't need to poke about in the registry. You can post about the cursor issue in the software forum.

 

Re run the procedures if you believe malware exists on your machine. However, you will need to start a brand new thread as this one is what you could call cluttered now. Thanks.