"Invalid Boot.ini" or "Windows could not start" error messages

Discussion in 'Other' started by bjgarrick, Dec 8, 2007.

Thread Status:
Not open for further replies.
  1. bjgarrick

    bjgarrick MajorGeeks Admin - Malware Expert

    "Invalid Boot.ini" or "Windows could not start" error message
    1. Make sure the computer is set to BOOT from the CD-ROM or DVD-ROM drive. If this has not yet been done you will need to configure the computer to boot from the CD-ROM or DVD-ROM drive.

    2. Insert the Windows XP CD-ROM into your CD-ROM or DVD-ROM drive, and then restart your computer.

    3. When you receive the "Press any key to boot from CD" message, press a key to start your computer from the Windows XP CD-ROM.

    4. When you receive the "Welcome to Setup" message, press R to start the Recovery Console.

    5. If you have a dual-boot or multiple-boot computer, select the installation that you have to use from the Recovery Console.

    6. When you are prompted, type the administrator password, and then press ENTER.
      • Note: If you do not have one, just press ENTER.
    7. At the command prompt, type bootcfg /list, and then press ENTER. The entries in your current Boot.ini file appear on the screen.

    8. At the command prompt, type bootcfg /rebuild, and then press ENTER.
      • This command scans the hard disks of the computer for Windows XP, Microsoft Windows 2000, or Microsoft Windows NT installations, and then displays the results. Follow the instructions that appear on the screen to add the Windows installations to the Boot.ini file. For example, follow these steps to add a Windows XP installation to the Boot.ini file:
      A. When you receive a message that is similar to the following message, press Y:
      B. You receive a message that is similar to the following message:

      This is the name of the operating system. When you receive this message, type the name of your operating system, and then press ENTER.

      This is either Microsoft Windows XP Professional or Microsoft Windows XP Home Edition.

      C. You receive a message that is similar to the following:

      When you receive this message, type /fastdetect, and then press ENTER.
      • Note: The instructions that appear on your screen may be different, depending on the configuration of your computer.

    9. Type exit, and then press ENTER to quit Recovery Console and reboot your computer.
      • After you have rebooted, the updated boot list appears when you receive the "Please select the operating system to start" message.
    Microsoft Article ID: 330184
     
Thread Status:
Not open for further replies.

MajorGeeks.Com Menu

Downloads All In One Tweaks \ Android \ Anti-Malware \ Anti-Virus \ Appearance \ Backup \ Browsers \ CD\DVD\Blu-Ray \ Covert Ops \ Drive Utilities \ Drivers \ Graphics \ Internet Tools \ Multimedia \ Networking \ Office Tools \ PC Games \ System Tools \ Mac/Apple/Ipad Downloads

Other News: Top Downloads \ News (Tech) \ Off Base (Other Websites News) \ Way Off Base (Offbeat Stories and Pics)

Social: Facebook \ YouTube \ Twitter \ Tumblr \ Pintrest \ RSS Feeds