clearing netbt

[Josh420x]

hey guys i'm new to these forums, ususally can figure things out for myself but this ones got me puzzled, im trying to repair my network connection and i keep getting a error saying windows could not finnish repairing the problem because the following action cannot be completed Clearing NetBt for further assistance contact the person who manages your network, what do i do to fix this please help

[AbbySue]

Welcome to MajorGeeks Josh420x.

I have moved your thread to our Networking forum as many of those that volunteer in the tech forums don't get a chance to visit the general forums. Someone will be along to assist you shortly.

AbbySue

[cat5e]

In General, you can debug the Network Setting of the computer following these steps.

Step One. Check the Network parameters in the Computer's Device Manager. Make sure that the drivers are installed correctly; there is No IRQ conflict, and No Ghost installation. http://www.ezlan.net/faq#ghost

Step Two Verify Basic network setting in the OS: http://www.ezlan.net/Installing#verify
If the above two Steps indicates that every thing looks good but functionally it does not work.

Step Three. Check (and repair if necessary) the Socket Layers, Winsock, and or refresh the TCP/IP Stack. http://www.ezlan.net/clean#refreshnet

If need to Reinstall; Log to this page it have a lot of links to instructions for Windows Network Installation - http://www.ezlan.net/Installing.html

:D

[Josh420x]

thank you very much for your help, winsock fixed me right up

[Josh420x]

thankyou very much
Josh

[rizon1]

Originally Posted by cat5e

In General, you can debug the Network Setting of the computer following these steps.

Step Three. Check (and repair if necessary) the Socket Layers, Winsock, and or refresh the TCP/IP Stack. http://www.ezlan.net/clean#refreshnet

:D

3 years after you posted this, I needed the same help and it worked a treat (so far!).

Very many thanks!