Bo Stack buffer over flow on media player

I have read the thread on BO stack . Here is my copy of HJT

 

Welcome to MajorGeeks.com, please follow our standard cleaning procedures:

http://www.majorgeeks.com/images/grenade.gif Run ALL the steps in this Sticky thread READ & RUN ME FIRST Before Asking for Support

• Make sure you check version numbers and get all updates.

http://www.majorgeeks.com/images/grenade.gif Very Important: Make sure you tell us the results from running the tutorial...was anything found? Were you unable to complete any of the scans?...Were you unable to download any of the tools?...Did you do the on-line scans as suggested? etc.

http://www.majorgeeks.com/images/grenade.gifAfter doing ALL of the above and you still have a problem, make sure you have booted to normal mode and run the steps in the below thread to properly use HijackThis and attach the log:

http://www.majorgeeks.com/images/grenade.gif Downloading, Installing, and Running HijackThis

• Make sure you also rename HijackThis.exe as suggested in the procedures. Use analyse.exe for the new name. This is very important due to some new infections going around..

http://www.majorgeeks.com/images/grenade.gifWhen you return to make your next post, make sure you attach the following logs and that you have run these scans in the following order too:

• CounterSpy Log - only for Windows XP, 2K, & NT users
• AVG Antispyware Log - ONLY IF NEEDED you were not able to run CounterSpy. - only for Windows XP, 2K, & NT users
• Bitdefender Log - from step 6
• Panda Scan Log - from step 6
• runkeys.txt - the log from GetRunKey.bat
• newfiles.txt - the log from ShowNew.bat
• HijackThis Log

NOTE: You can only attach 3 files in a single message so it will require that you use two messages to attach all of these logs!

 

Ok Ive read the Read me first and run this Malware forum instructions and am going to past my logs accordingly to the instructions. This reply will be one of two in order to load all the logs.
P.s. Thanks for any help you can provide.
P.s.s. Im pretty sure this virus was picked up from and adult site. I will load Couter spy
Bit defender and Panda logs first. Looks like one scan is to large I will load that in next thread

 

Next thread with just Bit defender file BDscan.txt
This file wont load as I might choosen wrong setup instructions I will continue to load remaining logs. Getrun, Shownew and Hijack logs

 

I was not able to upload bitdefender file because I choose to see all the files instead of the default setting, However I ran BD again out of order and Im including the log in this reply .. Thanks again for any help you can provide me

 

First, please disable any antivirus and/or antispy programs you have installed so they will not block this fix.

Step 1:
Please look in Add/Remove Programs for the following and uninstall if found. If you get any errors just make a note and proceed.

Step 2:
Now scan with HijackThis and check the boxes for the following entries:
( Make sure ALL browser windows are closed when you click FIX )

Again, make sure ALL browser windows are closed when you click FIX.

Step 3:
Next Reset Web Settings & Default Security Settings

Note for IE 6 users:
To Reset Web Settings:
Right click on your desktop Internet Explorer icon and select Properties. Then click the Programs tab and then click "Reset Web Settings". Now go back to the General tab and set your home page address to something useful like www.majorgeeks.com. Click Apply. Click Delete Cookies, Click Delete Files and select Delete all Offline content too, Click OK. When it finishes Click OK.

If you do not have an Internet Explorer icon on your Desktop, click Start, Control Panel (for some systems it may be Start, Settings, Control Panel), Internet Options, Programs tab and then click "Reset Web Settings". Now go back to the General tab and set your home page address to something useful like www.majorgeeks.com. Click Apply. Click Delete Cookies, Click Delete Files and select Delete all Offline content too, Click OK. When it finishes Click OK

To Default Security Settings:
Right click on your desktop Internet Explorer icon and select Properties. Then click the Security Tab and click Default Level for Internet, Local Intranet, Trusted Sites, and Restricted Sites. For IE 7 users, simply click the "Reset all zones to default level" button.

Note for IE 7 users:
Select Internet Options, then the Advanced Tab and then the Reset button under Reset Internet Explorer Settings.


Step 4:
Please download ATF Cleaner by Atribune. This program does not require an installation. The executable actually runs the program.

NOTE: This program is for Windows XP and Windows 2000 only. ATF Cleaner will remove all files from the items that are checked so if you have some cookies you'd like to save. Please move them to a different directory first.

• Double-click ATF-Cleaner.exe to run the program.
• Under Main choose: Select All
• Click the Empty Selected button.

If you use Firefox browser

• Click Firefox at the top and choose: Select All
• Click the Empty Selected button.
  • NOTE: If you would like to keep your saved passwords, please click No at the prompt.

If you use Opera browser

• Click Opera at the top and choose: Select All
• Click the Empty Selected button.
  • NOTE: If you would like to keep your saved passwords, please click No at the prompt.

Click Exit on the Main ATF Cleaner menu to close the program.


Step 5:
After you have completed ALL of the above in the correct order, please attach the following logs.

• HijackThis Log
• ShowNew Log
• GetRunKey Log

Let me know of any problems you may have encountered with the above instructions and also let me know how things are running now.

 

I can't thank you enuf for all you have suggested and done in order to rid the virus on my computer. I will attache my logs for your review so that you can use for your information gathering and knowledge base. The only line that I didn't delete from the HJT app was the last line beginning with 04- Startup LIME Wire on starup.ink etc. and that was only because it was not there when I ran the most recent executable.
I'm running Mcaffee Virus scan enterprise ver 8.0 I was wondering should I leave the other programs Ive installed on my computer. Thats Spybot and AVG antispyware as I uninstalled Counter spy under your previous instructions. Any suggestions as two what malware software I should use in conjunction with McAfee enterprises or is having one anti virus program runnign in the background the best way to go.
Again Thank you for your help time and quick responses.

 

Run HijackThis once more, before you fix anything be sure you close ALL Internet Explorer windows.

Fix the entries below...

 

I'm not familiar with McAfee so I'm not sure what your suite has, I do recommend one antivirus, one firewall and one antispy program. If the Enterprise version has those then you're good but if not then I would look at getting additional. For more information with this, see step 11 below.

If you are not having any other malware problems, it is time to do our final steps:

1. If we used Pocket Killbox during your cleanup, do the below
   • Run Pocket Killbox and select File, Cleanup, Delete All Backups
2. If we used ComboFix, you can delete the ComboFix.exe file, C:\ComboFix folder, C:\QooBox folder, C:\WINDOWS\nircmd.exe, and the C:\combofix.txt log that was created.
3. If we used SDFix you can delete all the SDFix related files and folders from your Desktop or whereever you installed it.
4. If we used SmitFraudFix, you can delete all files and folders related to it now including the c:\rapport.txt log.
5. If we used VundoFix, you can delete the VundoFix.exe file and the C:\VundoFix Backups folder and C:\vundofix.txt log that was created.
6. If we had your run FixWareOut, you can delete the Fixwareout.exe file and the C:\fixwareout folder.
7. If we had you run Avenger, you can delete all files related to Avenger, the log (avenger.txt) and C:\avenger.
8. If we had you download any registry patches like fixme.reg, fixme1.reg or fixWLK.reg (or any others), you can delete these files now.
9. You can delete the ShowNew.Zip and GetRunkey.Zip files and the files that you extracted from the ZIP files. You can also delete the C:\newfiles.txt and C:\runkeys.txt logs that were created
10. If you are running Windows XP or Windows ME, do the below:
    • go back to step 8 of the READ & RUN ME to Disable System Restore which will flush your Restore Points.
    • Then reboot and Enable System Restore to create a new clean Restore Point.
11. After doing the above, you should work thru the below link:
    • How to Protect yourself from malware!