Revo

Discussion in 'Software' started by peterr, Sep 25, 2011.

  1. peterr

    peterr MajorGeek

    If you can see items that are obviously part of the program you want to remove, is it safe to use Revo?
    I ask because I used it to remove a camera program and it found 309 items to remove. However, i took the time to see if each had to do with the program.Therefore two questions;

    1-will some other registry keys be removed if each removed is definitely part of the program you want to remove?
    2-if you choose a less deep option would it be safer to run or as safe as add/remove? I don't know if this is begging the question.
    Thank you
     
  2. plodr

    plodr MajorGeek Super Extraordinaire Moderator Staff Member

    You only remove items in bold. If you stick to removing bolded items, you should be safe.
    I have never had a problem doing it this way and sticking to the moderate setting. I do once in a while, especially if it is a security program, remove using the moderate setting than press the back arrow button and use the mist aggressive setting to see if there is anything more to be cleared out.
     
  3. peterr

    peterr MajorGeek

    I was told that one must be able to read the units to be deleted so that is why it is for pros -a little patronizing to say the least.
    I have used it for at least 50 times over the years and never had a problem. I always read the items to be removed to make sure they belong to the program. Yes, I only remove the ones in bold with the blue bird and use the default level.
    I guess I was scared off when this"pro" said it will remove Windows keys as well as program keys. I don't know enough to argue but I think if the deletion says the program or makes reference to it, it is safe. I am going to continue to use it.
    I cannot imagine the remnants left behind without it.
    Thank you
     
  4. plodr

    plodr MajorGeek Super Extraordinaire Moderator Staff Member

    It removes things from different sections of the registry because when you install a program, it can add registry keys to HKLM (local machine) as well as HKCU (current user). Maybe that's what the person was referring to.
     
  5. mjnc

    mjnc MajorGeek

    If you choose the First option, Built-In, that is the same as using Add or Remove Programs, since it only runs the uninstaller provided with the installed software's package.

    I would be wary of using the Advanced setting, as it could remove registry items that belong to something else. That's just my opinion.
     
  6. peterr

    peterr MajorGeek

    I can't remeber how many choices you have so I will use the default or the one beneath it, as long as it is not the First(built in).
    Do you use Revo, and if so, what level?
     
  7. sach2

    sach2 Major Geek Extraordinaire

    For what it is worth: I've used the moderate (one lower than deep) since Revo came out. I don't even check the items marked for deletion anymore because I've never had a problem. I just hit Select All and then hit Delete. I consider it a very safe program.
     
  8. Earthling

    Earthling Interplanetary Geek

    I use Revo too but only at the default Moderate setting. And tbh, although using it this way has never caused any problem, I have my doubts whether there is any benefit at all from using it as against simply using Add/Remove. Yes. it does remove a few disconnected registry entries, but I have never seen any evidence at all that doing this is in any way beneficial. I do it simply because I have a tidy mind and hate clutter - both at home and on my comp.
     
  9. mjnc

    mjnc MajorGeek

    Yes, I do use Revo Uninstaller.
    Like sach2 and Earthling, I typically use the Moderate level, and never the Advanced level.

    I do Not use Revo to uninstall drivers, as the Nvidia graphics driver, prior to updating.
    It is better to use Add or Remove Programs in that case.
     
  10. plodr

    plodr MajorGeek Super Extraordinaire Moderator Staff Member

    I just installed and used Revo on a new windows 7 computer to remove an HP printer.
    I started with the moderate setting and then after removing items, I went back and clicked the bottom most setting and the program found 9 additional registry items. I removed those too.
    I installed a different HP (this is a printer, scanner copier) and then tested all the functions for the user.
    Revo did the job because I got zero complaints from windows when I went to install a different model printer.
     
  11. bigbazza

    bigbazza R.I.P. 14/12/2011 - Good Onya Geek

    I always use the bottom most setting (most powerful) when running Revo.
    I don't think I've ever had problems with this setting.
    As a last resort. anyone can just delete the files in a Folder and then delete the Folder and then run CCleaner.
    BUT THAT IS THE LAST RESORT (and not recommended by me ;) )

    Bazza

    ===

     
  12. sach2

    sach2 Major Geek Extraordinaire

    I think that I've done this too and had similar results with it finding a couple of extra entries. I don't really worry about getting every last bit but with some program uninstalls you really do want to get every last bit. I'll keep deep scan in mind for those times.
     

MajorGeeks.Com Menu

Downloads All In One Tweaks \ Android \ Anti-Malware \ Anti-Virus \ Appearance \ Backup \ Browsers \ CD\DVD\Blu-Ray \ Covert Ops \ Drive Utilities \ Drivers \ Graphics \ Internet Tools \ Multimedia \ Networking \ Office Tools \ PC Games \ System Tools \ Mac/Apple/Ipad Downloads

Other News: Top Downloads \ News (Tech) \ Off Base (Other Websites News) \ Way Off Base (Offbeat Stories and Pics)

Social: Facebook \ YouTube \ Twitter \ Tumblr \ Pintrest \ RSS Feeds