B450 Tomahawk Issue

Can any one help me with a video issue,

I am facing a video display problem,

The B450 Tomahawk mother board took me about 45 mins to get it turned on.The mother board lights up just fine.And Cpu fan is running fine.But the problem i am having is trying to get my MSI video card to work.

The video card powers on perfectly fine.But no video is displaying.Should i leave it run and see if it will display in a little while.

 

https://www.amazon.com/gp/product/B07F7W5KJS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Video card is a MSI Radeon RX 570

 

So I think the top one is the cpu.This motherboard uses the Ryzen 7 x2700.So what's the deal.

 

Mine has a jumper but not the little plastic jumper thing and i don't think i have a spare but will look.

I was at work when i posted so sorry for the long delay.

Should i remount the cpu cooler???

 

I think this motherboard is DOA,So i am just going to return the item.

Thanks for the help.The thing that really annoying me is i waited a month at least for this replacement board Because ups takes for ever for shipping.

 

I had to re-config every thing again for my other motherboard.Due to this mess Seems like Ryzen is being a pain and i never had to RMA two freaking mother boards.I must be having bad luck or some thing.

 

Well for some reason I kept getting CPU error on red LEDs.So I am not sure if it's the CPU itself or if it's the motherboard.As you can see I can build them without issues.I have probably gotten two faulty motherboards from MSI and they use to be good.But I read online that the B450 tomahawk motherboard was very faulty.And would only work for a while.I had a Msi motherboard for about 5 to 6 years before it went dead.

 

I will look into Asrock motherboards.Any suggestions.

 

Are you following all guidelines from AMD? See the anti-static section.

https://www.amd.com/en/support/kb/faq/cpu-100

 

Just the B450 motherboard

The other motherboard did not have the accessories kit and the cpu brackets from new egg.So basically it was a open box that did me no good for 243 dollars.So i could not even test to see if the mother board was good or not.

 

I never use the static bags.

And i never use the guidelines.I have never had issues with motherboards and static.The problem is they make stuff so dam cheap any more it basically turns into a paper weight.

 

Asus TUF series.

 

I wouldn't say so cheap as much as so small. Into the single digit nanometer scale any difference in potential is like a tornado racing across the circuits of the chip. A discharge across a section of address paths or data paths or a few needed registers can have a profound outcome.

 

Is it safe now??!!