idd*.tmp.exe and WinAntiVirus2006 popup

Welcome to Majorgeeks!

Please follow our standard cleaning procedures which are necessary for us to provide you support. Also there are steps included for installing, running, and posting HijackThis logs as attachments.

* Run ALL the steps in this Sticky thread READ & RUN ME FIRST Before Asking for Support
* Make sure you check version numbers and get all updates.
* Very Important: Make sure you tell us the results from running the tutorial...was anything found? Were you unable to complete any of the scans?...Were you unable to download any of the tools?...Did you do the on-line scans as suggested? etc.

* After doing ALL of the above you still have a problem make sure you have booted to normal mode and run the steps in the below link to properly use HijackThis and attach a log:

Downloading, Installing, and Running HijackThis

Make sure you also rename HijackThis.exe as suggested in the procedures. Use analyse.exe for the new name. This is very important due to some new infections going around.


* When you return to make your next post, make sure you attach the following logs and that you have run these scans in the following order too:
o CounterSpy
o AVG Antispyware log - ONLY IF NEEDED you were not able to run CounterSpy
o Bitdefender - from step 6
o Panda Scan - from step 6
o runkeys.txt - the log from GetRunKey.bat
o newfiles.txt - the log from ShowNew.bat
o HijackThis

NOTE: You can only attach 3 files in a single message so it will require that you use two messages to attach all of these logs!

 

Your HijackThis log is ridiculously small and missing too many things that would normally be there. What, may I ask, have you been doing on your own and have you been using HJT to fix/delete lines? You may be able to restore them from the HJT backups.

 

Ok...we'll try to work with that ...now could you post the other requested logs, please?

It would appear as though you saved the HJT to the place we expressly ask not to save in ..please reinstall it as directed in the Read and Run first ...and then run it again and post the results.