Asus P4sd-VX connector block help

Hi guys,

I realise this may be of topic but i was wondering if any of you could help me with the panel wiring jumper block thing on the mainboard?

I bought a new case and promptly unplugged and pulled out the wires in the PANEL1 header (goes to main switch, hdd, power-on and standby LEDS...

And now everything is nicely fitted in the new case i dont know which wires go where in the jumper block....

I was wondering if you guys had the same MOBO if it was possible to find the color of the wires and to which pins?!?!

The mobo is a P4SD-VX and its from a Sony Viao desktop model PCV2236...

I tried to search for the OWNERS manual but could only find a USER GUIDE and some other GUIDE nothing with any references to the PANEL1 Pin Header


Any and all help would be appreciated....


Z

 

Difficult to find as you say .. Do you see a reference on the end of each wire like PLED PWR etc. get a magnify glass and look on your mobo and you should see aquivelant references etched/printed there. Also look closely and you will see - & + (minus and plus) which is also written on connector at end of case wire, then wire appropriately. If wrongly wired no harm will come to com. I'll keep looking for manual.

 

See if this helps.

 

You can find the PDF manual for the MB in myprevious post here. It says User Guide, but it is the full manual.

http://safemanuals.com/user-guide-instructions-owner-manual/ASUS/P4SDX-_E

 

Hello everyone who replied to my question,

Than you for all your advice and pics.
Unfortunately none of the pics were correct,

I did manage to get it working and have attached a pic of the wiring below.
Funny how it differs from the NONE oem P4SDxxxx boards
What naughty people SONY Are!!




Thank You to everyone.

Z

 

Hi there i'm Thomas from Germany,

i have actual the same problem as DocZaf and was glad to find a solution in here. But the posted pic from DocZaf can't be downloaded here.

Is anyone able to help me. I need the connectors layout of this mobo.

Thank you very much.

Thomas

 

Hiya Thomas from Germany,

Oops I apologise for the picture going missing,
Seems like some of the files got moved to another folder.

You'll be happy to know I have replaced the photo again.


DocZaf

 

Hey DocZaf,

thank you very much for your immediatly reply.

Now my mobo is working fine with the new case.

Greetings from Germany

Thomas

 

Hello DocZaf
I'm Romain from France. I recently decided to change my case and I have to face the same problem as you ! No way to find any user's manual for P4SD-VX motherboard.
Can you resend the picture of the wiring of the front panel devices ?
thanks a lot

 

I have the same problem, and I noticed that the image posted by DocZaf is missing. Does anyone still have a record of the information?