Best Overclocking Mainboard?

Hello Im wondering...i know theres diffrent opinions on this but im upgrading my system and im looking for a good overclocking mainboard that supports clocking over 2.5 ghz my current system is an old msi mainboard supports slow ddr 266 or what it was 2 tired 2 remember however i have it around 13% clocked its barely stable i want some serious clocking system(I hate intel i will never run it so it has to support amd)+i havent found a clocking menu on orginal intel bios neither so i know my requirements though but if there is any pls send it here

Thnx

//Ultimate Naab

 

BTW my Everest Report is here
Report
*note: Im not friendly to intruders

 

A Great OCing MOBO (socket A) is DFI Lanparty Ultra B, is getting harder to find one:
http://www.pcstats.com/articleview.cfm?articleID=1527
Here's one on Ebay:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=15920&item=6782673024&rd=1&ssPageName=WDVW
DFI Infinity is good one too, about same as the Ultra B less eye candy, may be hard to find too!

If your going to athlon 64, still say DFI

 

Thnx i appriciate it.

 

What ASUS said.... For socket A the Abit NF7 is the best CPU overclocker but the DFI infinity / lanparty ( the same mobo only with giga lan and other bells and wistles ) are the best FSB overslockers the dif for CPU overclocking is almost non exestent thow.... I ran 500 fsb @ 2.5 rock solid...as for A64 i donno what are the best mobos so far but id still go DFI ......

 

In my opinion, DFI mobo get Vram higher than the others, so it help you to get high OC at FSB and vram run at 1/1 (excepting hack bios or modding Vram for others)
But timmings of ram of DFI mobo is so difficults more than the others.

 

yea ive done some researching on the NFII the thing is its barely any better than the one i have now except it has no high voltage blocker and got better max fsb the thing im running now have fsb max at 200 and i always run in 1:1 i found out that the small boost(VERY SMALL(BUT STILL A BOOST in bootup)) damages my hardware more than if i run it as normal :/ now onto another thingy i want...to beat the 2050mhz...ive tried but its my hard drive it pops if i put it on more than 1.6v heh i just lov old maxtors ^^(im getting a new 1 in abaut 2 weeks) hmmm ive tried diffrent multipliors trying to get the os booting up on 2056mhz(=4 me 152 fsb (i think)) well give me some hints except raising the voltage.

thnx

//UltImAte NaAb

 

Read this :
http://forum.majorgeeks.com/showthread.php?t=65929
Pay attention to your CPU t*
the problem here is not your HD
give us more SPecs : ram, PSU, ......

 

the second msg i wrote i had linked the entire everest report but sure i post it again so u clearly see it

HERE IS MY COMPUTER STATS AND REPORT!!

Report

HERE IS MY COMPUTER STATS AND REPORT!!

 

If You can timmings of ram in mobo bios set it to 2.5 4 3 7, 2.5 4 4 8, 3 4 4 8.
or changing ram to PC2700 or pc3200

 

Ok Ill give it a try but im soon changin mainboard with my moms she have a case sensative board doesnt support her graphics card that runs on 1.5 voltage the mainboard gives it 3.3v so were changing mainboard soon i has better fsb settings than this one that i have its an asus a7v8x-x...i so hate reinstalling windows :/ allthough i did it once evry month just a half year ago when i ran xp now ive runned 2k in 3 months i so also hate backupping evrything i have...which isnt much but anyway i will test some settings alike those one on the new mainboard doesnt expect it to be the same lets just hope i dont run into any fights with that mainboard making me hafto buy a new gfi lanforce NF4 and a amd athlonxp 3200+ or if i find some more powerful. well im off now checking some parts 4 my suzuki pv it needs some tweaking...with some speed...some high speed...no more comments

 

Intel Abit, Asus
Amd A64 DFI LanParty & Asus