BIOS Help...

I recently put together my new comp and had a small problem. I want to run the nTune tuner thing, but of course (as it says) it crashes the comp a lot. This really isn't a problem in itself, the problem is the BIOS I have makes me hit F1 to get past the POST screen.

I'm running Phoenix AwardBIOS v6.00PG on a EVGA 680i LT motherboard. I'm not sure if there's anything I can do, but so far I haven't found anything in the BIOS that will let me bypass that or take it off.

 

The F1 key is hard-coded in the BIOS program. The BIOS program is effectively halted at this point because a hardware error or checksum error has been detected. All the BIOS's that I know of, have this sort of function built in. Finding the cause of the error, is usually described in the error message or error beep codes.

 

Ah, I see. This is probably from the 'Floppy Drive' error I'm getting when I boot up. I don't HAVE a floppy drive, so I'm not sure what to do lol. I tried changing the boot sequence with no luck, so I'm at a loss.