Computer Temp and Few Hardware Problems

Hi i Opened my pc because i was gettin errors on desktop even after resettings bios and cpu chip, i also cleaned my pc out completely and also reset memory.
i also took my power supply fan out and cleaned inside i wasent sure on witch way my power supply fan went on, in the right way atm, its blowing air out the back of my tower unit so correct me if that's rights please.
ive got everything wired up and also done a couple of screenies to show you my spects,also want you to tell me if my pc is at a good temprature considering i got a massive fan on side case pannal of my unit also a new cpu fan that clicks in,also a power supply fan witch i need to know if its on the right way bcos the wires cutting accross its inside the metal box not fancing out where you can see it, and the fan is directed near the cpu fan but blows out the back of the tower if u get me not onto the cpu only inside the power supply box so it blows accross my power supply chips and circuts.

please get back to me and let me know if ive done ok and also let me know why my pc is freezing so often and how can i get rid off cpu fail message witch ou going into bios to switch 800mps off or w.e it is.and tell me where i can get a hold of the sm bus.

thanks be nice if you can help me

 

the second pic shows your mb temp to be 12 degrees, and your cpu to be 20 degrees. Is this just after boot up? because those are some pretty cold temps. Looks allright to me. Are you still getting errors on your desktop? if so please send us some screenshots.

 

u got msn ? add me if do so ** email address removed ** if u not aloud or if there any problems thats ok. it would be it easyer for me

well my asus probe 2 software is default when i start up my pc,also (power) is hiting 2500 rpm last night i cleaned my whole pc that was replaceing the DDr rams sticks fans cleaned Mboard cleaned also (my power supply witch i pulled apart last night and cleaned the wings of the fan and forgot witch way the fan blows out of if u know let me know (back or inside case it flows) the fan is overiously for a pentium(R) D CPU 3.20Ghz 2 Gig Ram (physical address exstension) lo0l.

i aint a clue how to get best bios update i used the tool and it ask me to flash i dont have a floppy drive.
also sometimes i freez lol sincei installed smbus its not really froze as much

Power Pack is win power atx 650L

Mother Board Assus Model P5ND2

Sli Grafix Card Geforce 7900+ Gto

Vcore 1.26V
+3.3 3.30v
+5.0 5,00V
+12.0 12.16V
CpU 11 C (verious up to 20 sometimes)
MB 22C
Power 2.400 - 2.500

When i Start up my pc i get cpu failure i know how to disable the error in the bios but why is it there after resetting everything (intel chip) (bios Battery)

i also get error when i boot pc it says

(WARNING* your computer cpu fail or speed too low you also disable this warning message in setup

(AND MY BIOS IS TELL ME 22C CPU
MB TEMP 23 C

 

Air should flow in from the front and side and out from the back.

 

yeh well it comeing out from back and warmish air from the front as the fan is placed inside so there a bottom fan sucking air from inside the machine and out the back.
its a win atx 650L i bought it from computer orbit wich is a company from the uk www.computerorbit.co.uk

my case unit > http://www.computerorbit.co.uk/Itemdesc.html?ic=XM4DE&eq=&Tp=

my powerpack with fan
look like this the bottom fan u can see is what i mean, i opened the case and then forgot witch way fan goes on lol otherwise its sucking air from inside my unit into the pack. if thats right

http://www.computerorbit.co.uk/Itemdesc.html?ic=1000WATXAK&eq=&Tp=

also can u tell me what temp is normal for MB and CPU if you can so i can keep a record on my temp's please

 

The power supply should be blowing air out.
Also, you shouldn't really take apart your power supply. There's a lot of electricity stored in there. (at least that's what I read)

 

You want the air going in one direction only, front to back as I said, there should be nothing coming out the front. As to CPU temps, I'd say 40C or so not, under stress, should be just fine. It seems your temperature sensor is faulty, there's no way a CPU is ever going to be at room temperature unless your system is off.

Since you're getting low fan speed errors, are you sure all your fans are working? I had that issue, you hit F1 to get out of it?