gfx installation problems

hi,
ok bough a new XFX gf 6200, 128mb graphics card problem , disabled my current one, put the card in and it loads , and when it gets to the windows loading screen it just stays there :|
any one know the reason for this? or how can i fix this?
allso in the installation guide where it says " reset current graphics card" cp > display > setting > advance > adapter > change , there is no change ? ?

thanks in advance
peanut

comp specs :
2.8 intel proccessor
512 + 256 ram
80 gig hard drive
currently , sis 16 mb graphics

 

http://forums.majorgeeks.com/attachment.php?attachmentid=40092&stc=1&d=1155052744
Report.txt

here is a everest report
thanks
peanut

 

Your everest report suggests that your onboard video card isn't disabled after all. You will need to go into BIOS to disable it, and then the system should use your new video card. Post back if you need any help doing this.

 

Yes i know , when i disable it fine , the boot again , on bios select apg to boot first then it goes to the begging of the loading screen and stops
thanks

 

Can you describe how you disable it? It sounds to me like you are disabling it in Device Manager rather than in BIOS. Is the "boot AGP' setting the only one you've changed in BIOS?