I keep getting stop errors please help

Error caused by a device driver

Thank you for sending an error report to Microsoft.

Error report summary

Error type : Windows stop error (A message appears on a blue screen with error code information)
Solution available? : No (see Next steps)
What does this error mean? : Windows has encountered an error from which it cannot recover and needs to restart
Cause : Unknown device driver
Computer symptoms : A message appears on a blue screen with error code information (for example: e.g. 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED)
Additional steps for you to take : Important: Please continue to send error reports so analysts at Microsoft can study and try to correct the problem as quickly as possible

Information about this error

You received this message because a device driver installed on your computer caused the Windows operating system to stop unexpectedly. This type of error is referred to as a "stop error." A stop error requires you to restart your computer.

Next steps

We have analyzed your error report and at this time are unable to determine the exact cause of the error. However, Microsoft will continue to analyze this error report to try to determine the specific cause of the error. If we are able to find the cause and correct it, and you encounter the same problem, you will receive an updated response that includes instructions for resolving the problem.

Article ID : 10
Last Review : December 21, 2005
Revision : 2.0

Additional Technical Information

How to Troubleshoot Hardware and Software Driver Problems in Windows XP (Q322205)

--------------------------------------------------------------------------------


Microsoft is interested in your opinions about Windows Error Reporting so that we can continue to serve you better. Please take a few minutes to complete the following anonymous survey.

Take Survey


You can track this error report by clicking the Track this error report link. If you choose to track your error report, you will be notified of resolutions to this problem as they are identified.

Track this error report

 

Did you just install a new piece of hardware or update an existing driver. If so, and this started happening right after that, then it is a good guess to say that the new hardware driver or existing updated driver didn't install correctly, or became corrupt somehow.

Roger

 

i ADDED A SECOND HARDRIVE thats it?

 

Make sure your jumpers are set correctly on both drives!!

Let me know if you need more details.

Roger

 

THEY ARE SET CORRECTLY sorry about caps not yelling? I think the gb of the drive might be over the max for my pc? How would i find the max gb supported for my pc?

 

Can you tell me how they are set...it's not that I don't trust your answer, but it is better to be safe than sorry!!

Otherwise...What is the make and model of your system, and the specs of all the peripherals (hard drives, video, memory, Motherboard & CPU, plus any PCI cards like sound card, modem, NIC card, etc.)

If you are not shure how to acquire this info then download Everest (which I put a link to just below) and install an open it and it will tell you every last detail of you system!!

Everest Free edition

Let me know if you need more explanation on retrieving system specs!!

Roger

 

I have everest but how do i run a report that will record all this info to it. Thant way i can save it and attach it.

Thanks

 

Go to Report>Quick Report-all pages>Plain Text and after it finishes processing the report, save it in a destination easy to remember, and then attatch it to your post.

Roger

 

ok here it is