Need Help Finding Missing Drivers for Linspire to Win Changeover

Hello everyone,

I just recently purchased a GQ3121 EliteGroup Computer which included an install of Linspire 4.5... Which might have been ok, if they didn't try to charge me for free software. Oh, and it didn't come with any kind of restore disc that I can find...

So, I stripped it of Linspire and installed Windows 2000 Pro. (I don't have a legal copy of XP just laying around...) - I had a lot more problems than I expected doing this, but I got it done.

It runs just fine, with the exception of some VERY important drivers. When I go to device manager, here's the list of what it says the problem is.

Ethernet Controller
Multimedia Audio Controller
PCI Device
Universal Serial Bus (USB) Controller
Video Controller (VGA Compatible)

I also ran a couple of reports from Sisoftware Sandra:

SYSTEM INFORMATION-------------------------

SiSoftware Sandra

Processor
Model : AMD Sempron(tm)
Speed : 1.20GHz
Model Number : 1391 (estimated)
Performance Rating : PR1737 (estimated)
Type : Standard
L2 On-board Cache : 256kB ECC Synchronous, Write-Back, 16-way set, 64 byte line size

Mainboard
Bus(es) : ISA AGP PCI IMB USB i2c/SMBus
MP Support : 1 CPU(s)
MP APIC : Yes
System BIOS : Phoenix Technologies, LTD 6.00 PG
Mainboard : SiS-741
Total Memory : 112MB DDR-SDRAM

Chipset 1
Model : Elitegroup Computer Sys SiS741 CPU to PCI Bridge
Front Side Bus Speed : 2x 133MHz (266MHz data rate)
Total Memory : 128MB DDR-SDRAM
Memory Bus Speed : 2x 166MHz (332MHz data rate)

Video System

Physical Storage Devices
Removable Drive : Floppy disk drive
Hard Disk : WDC WD400BB-22JHA0 (37GB)
CD-ROM/DVD : CD-ROM F565E (CD 40X Rd)

Logical Storage Devices
1.44MB 3.5" (A : N/A
Hard Disk (C : 37GB (36GB, 98% Free Space) (NTFS)
CD-ROM/DVD (D : N/A

Peripherals
Serial/Parallel Port(s) : 1 COM / 1 LPT
USB Controller/Hub : SiS 7001 PCI to USB Open Host Controller
USB Controller/Hub : SiS 7001 PCI to USB Open Host Controller
USB Controller/Hub : SiS 7001 PCI to USB Open Host Controller
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
USB Controller/Hub : USB Root Hub
Keyboard : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Mouse : PS/2 Compatible Mouse

Power Management
AC Line Status : On-Line

Operating System(s)
Windows System : Microsoft Windows 2000 Professional (Win32 x86) 5.00.2195

Network Services
Network Drivers Enabled : No

Performance Tips
Warning 100 : Large memory sizes should be made of Registered/Buffered memory.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.

MAINBOARD INFORMATION---------------------

SiSoftware Sandra

Mainboard
Manufacturer : Elitegroup (ECS)
MP Support : 1 CPU(s)
MPS Version : 1.40
Model : SiS-741
System BIOS : 08/19/2004-SiS-741-6A7I8E19C-00

System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 2
Maximum Installable Memory : 512MB
Bank0/1 - A0 : DIMM 128MB
Bank2/3 - A1 : Empty

Chipset 1
Model : Elitegroup Computer Sys SiS741 CPU to PCI Bridge
Bus(es) : ISA AGP PCI IMB USB i2c/SMBus
Front Side Bus Speed : 2x 133MHz (266MHz data rate)
Maximum FSB Speed / Max Memory Speed : 2x 200MHz / 2x 200MHz
Width : 64-bit
IO Queue Depth : 7 request(s)

Chipset 1 Hub Interface
Type : MUTOL
Width : 16-bit
Full Duplex : No
Multiplier : 1/1x

Logical/Chipset 1 Memory Banks
Bank 0 : 128MB DDR-SDRAM 2.5-3-3-9CL 2CMD
Channels : 1
Speed : 2x 166MHz (332MHz data rate)
Multiplier : 5/4x
Width : 64-bit
Refresh Rate : 15.60µs
Power Save Mode : No
Fixed Hole Present : No

APIC 1
Version : 1.04
Multiplier : 1/2x
Maximum Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : Yes

Memory Module(s)
Memory Module 1 : M2G5HABAMK5E161AAD 128MB 4x(16Mx16) DDR-SDRAM PC2700U-2533-700 (CL2.5 up to 167MHz) (CL2 up to 133MHz)

Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No

Temperature Sensor(s)
Board Temperature : 36.0°C / 96.8°F td
Power / Aux Temperature : 33.0°C / 91.4°F

Cooling Device(s)
Auto Fan Speed Control : No
Chassis Fan Speed : 3668rpm

Voltage Sensor(s)
CPU Voltage : 1.54V
Aux Voltage : 2.50V
+3.3V Voltage : 2.90V
+5V Voltage : 4.09V
+12V Voltage : 6.49V
-12V Voltage : -7.01V
-5V Voltage : -5.56V
Standby Voltage : 4.73V
Battery Voltage : 4.08V

AGP Bus(es) on Hub 1
Version : 3.05
Maximum Data Transfer Rate : 8x
Fast-Writes Enabled : No
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit
Aperture Size : 128MB

PCI Bus(es) on Hub 1
Version : 2.10
Number of Bridges : 1
PCI Bus 0 : PCI (1/1x PCIClk)

LPC Hub Controller 1
Model : Silicon Integrated Systems (SiS) PCI to ISA Bridge
ACPI Power Management Enabled : Yes
Multiplier : 1/4x

USB Controller 1
Model : Elitegroup Computer Sys SiS5597/8 Universal Serial Bus Controller
Version : 1.00
Interface : OHCI
Channels : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 2
Model : Elitegroup Computer Sys SiS5597/8 Universal Serial Bus Controller
Version : 1.00
Interface : OHCI
Channels : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 3
Model : Elitegroup Computer Sys SiS5597/8 Universal Serial Bus Controller
Version : 1.00
Interface : OHCI
Channels : 2
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 4
Model : Elitegroup Computer Sys SiS7002 USB 2.0 Enhanced Controller
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 8
Companion Controllers : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No

System SMBus Controller 1
Model : SiS 964 Int SMBus
Specification : 1.00
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : Yes
Speed : 55kHz

Expansion Slot(s)
PCI0 (1h) : PCI 32-bit +5V PME Full-Length Available (Silicon Integrated Systems (SiS) SiS648FX PCI to AGP Bridge)
PCI1 (2h) : PCI 32-bit +5V PME Full-Length Available (Silicon Integrated Systems (SiS) PCI to ISA Bridge)
PCI2 (3h) : PCI 32-bit +5V PME Full-Length Available (Elitegroup Computer Sys SiS5597/8 Universal Serial Bus Controller)
PCI3 (4h) : PCI 32-bit +5V PME Full-Length Available (Elitegroup Computer Sys SiS900 10/100 Ethernet Adapter)
AGP (8h) : AGP 32-bit +5V Full-Length Used (Elitegroup Computer Sys SiS661FX/760/741/M661FX/M760/M741 GUI 2D/3D Accelerator)

Port Connector
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO - Floppy Disk / None
COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female
Keyboard : Keyboard - PS/2 / PS/2
PS/2 Mouse : Mouse - PS/2 / PS/2
USB0 : USB - None / None

Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Warning 2507 : Mainboard has too few memory slots. Upgrading the memory may be difficult or expensive.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Warning 100 : Large memory sizes should be made of Registered/Buffered memory.
Tip 2513 : AGP Bus is unused or AGP card not fully AGP compatible.
Tip 2525 : Current AGP data rate not optimal.
Tip 2524 : AGP Aperture size should be less or equal to system memory.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.

------------------------------------------------------------------------

So, if there is any further info you need from me to help you help me, please let me know.

Thanks SO MUCH for your help!!
Chris