RRRROOOOCCCCKKKKk!

Just this minute Citylink pulled up and delivered my 5 110cfm silverstone case fans RRRRROOOOOCCCCKKKKKKK!

I'm gonna blow the crap out of this heatwave,feel the wrath of my 0.5kcfm case

RRRRROOOOOCCCCKKKKKKK!

oh yeh and my lovely new brushed aluminium cd cover or as you americans say aluminum.lol

RRRRROOOOOCCCCKKKKKKK

LOL

I'm gonna plug one of these bad boys in see if it fly's

 

woow ...hoo hoo...

The most important here is how to setup them at the airflow heading. with 5 fans I think you are verry pleased with t*

 

I'll have to be carefull it doesnt suck my cat in,something like this 3 intake,2 exaust plus the psu fan

 

I noticed a strange thing with my temps,If I used the comp just to use the net with mt akasa ak859 the temp would idle at 33 degrees sometimes,if I ran a stress test like 3dmark as summer came my temps were back in mid 50's,but no matter how long I left it idle hours it would never come back down again below 45 .

I started another thread about this msi mobo because there is little room for the warm air to escape between the memory and vid card it just gets sucked back in again by the fan,hopefully the airflow will beat this,but I'm still gonna buy an xp-90c its one of the only hsf's to fit horizontally on my mobo so the air can go straight out the back,it also the best air heatsink in the world,My 6800 would easily touch 60 degrees,while I was just surfin the web,I also think that was because of the warm air from the heatsinks being blown onto the back of it.

 

No no, Vga card will not be there. side fans is better for Vga card.

 

Hmmm... 2 fans on the floor of the case Rikky? I'm guessing you either leave your case lying on its side, or your case is mounted on top of a meshed and hollow stand?

 

Close I have made 4 longer feet,simple

 

Arrr.. silly me, as usual I've gone the big way round in answering questions If those are intake fans, you might wake up to find your cat stuck under your case unable to move because the intake fans are keeping him/her/it stuck to the base of the case!