Stop Error Code

I need to no if there is a site for Stop Error codes for Xp

i got a Code 07A just now.

 

I am doing Check disk right now seems there where a bunch of errors but the thing is its a new HD lol.

 

Bad PSU/data cable/motherboard chip?

0x7A = Usual causes: Memory, Paging file corruption, File system, Hard drive, Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, Missing Service Pack

 

Ram is good its still reading 8gigs
CPU is fine
i did main on computer again i am not sure if the PSU is going bad or not yet.Every thing seems fine.

Like i said this is a new 160Gig Hd

Operating System
MS Windows XP 64-bit SP2
CPU
AMD Athlon II X2 260
Regor 45nm Technology
RAM
8.00 GB Dual-Channel DDR3 @ 607MHz (9-9-9-24)
Motherboard
MSI 870A-G54 (MS-7599) (CPU1) 88 °F
Graphics
Default Monitor (1280x1024@60Hz)
Default Monitor (1280x1024@60Hz)
1024MB GeForce GTX 550 Ti (EVGA) 108 °F
Hard Drives
78GB Western Digital WDC WD800AAJS-00WAA0 (SATA) 76 °F
156GB Seagate ST3160316AS (SATA) 76 °F
Optical Drives
ATAPI iHAP322 9
Audio
NVIDIA High Definition Audio


Motherboard
Manufacturer MSI
Model 870A-G54 (MS-7599) (CPU1)
Version 3.0
Chipset Vendor AMD
Chipset Model 870
Chipset Revision 00
Southbridge Vendor AMD
Southbridge Model SB850
Southbridge Revision 40
System Temperature 88 °F
BIOS
Brand American Megatrends Inc.
Version V17.8
Date 01/10/2011
Voltage
+3.3V 3.232 V
CPU CORE 1.400 V
VIN2 2.208 V
VIN3 1.305 V
+5V 3.195 V
+12V 13.816 V
VIN6 3.040 V
VSB3V 3.232 V
CMOS BATTERY 3.152 V

 

I think it said my Paging file might have been corrupt

 

Memory dump is always a suggestion on the blue screen for that

I can try to find out the likely cause for you if you can get the dump file:
Find the minidump - C:\Windows\Minidumps\ XX ... XX.dmp, copy it to your Desktop and zip then attach the zip file here.
If it's a larger dump C:\Windows\MEMORY.DMP, you'll need to copy it to the Desktop, zip and upload the zip to a hosting service - Skydrive or whatever, make it publicly accessible and post the link in a reply.

Also detail what was happening: what you were doing, programs that were active, during the 5-10 minutes before it happened, that often helps a lot to track it down.

 

Now my MSI Afterburner said missing or corrupt i think i just updated it not too long ago.i think there might be some thing wrong with the 2.2 version.I got it off this site.I am running Anti virus scans

 

Overclocking, either by hard- or software, Bios or MSI Afterburner and similar 'board maker utilities, is a common cause of BSOD's, especially when you consider any overclocking is going to strain the PSU even further than usual. Weak or suspect PSU's can, and do, kill hard drives and data.

 

Well i only use the MSI afterburner too adjust my Fans my Video card is factory Overclocked on its own.

 

Well i am just going to backup my system and reinstall Xp might as well.

Now it seems i am getting some error with the Windows Activation product at logon but mine is Activated but i don't know way its poping up.

 

Looks like I used a banned word in my feeble attempt to give a humorous reply a few minutes ago - "I'll play it straight this time, guv'nor, honest I will."

Test for hardware faults using bootable diags from CD or USB before deciding whether to reinstall yet. Hardware errors can be incredibly frustrating and will undo anything you think you can do in software.

The 160GB new drive - SSD? If so, check for a firmware update. Still won't work? Try a different SATA port, on a different controller chip if your 'board has one.

 

I think it was a Software issue Not hardware it seems to be running fine now i did a fresh install.I think the Paging file be came Corrupt Some how i don't know i scan nightly no virus's poped up on radar.So i am not sure what the issue was really but oh well its normally quicker for me to install windows then siting there trying to figure out what the hell is wrong.

A lot of times its just a better idea to reinstall the Fing windows.As long as you back up your files then no worry i guess.

 

Now i am getting a Hardware error Code dam 0x00000f4

 

I think my SATA 160Gig had a bad connection it was klicking it gave a 0x0f4 code i think i need a new cord i switched cords on my 80gig to my 160gig ill see friday if my nabor has a extra one laying around.

 

0xF4? Unusual one - there's a similar scenario/0xF4 that can happen on XP with older IDE drives:

My go to page for BSOD's is http://www.carrona.org/bsodindx.html <--- big page warning!

If you have a bad PSU, it might kill any drive connected to it in seconds.

 

I think the issue was a lose cord issue was not tight them freaking sata cords can get a little touchy.