Testing Out A New Fan Setup.how Cold Is Your Computer

This is all Fans.Does not have water cooling.

Operating System
Windows 7 Professional 64-bit SP1
CPU
AMD FX-8350 7 °C
Vishera 32nm Technology
RAM
16.0GB Dual-Channel DDR3 @ 803MHz (9-9-9-24)
Motherboard
Gigabyte Technology Co. Ltd. 970A-DS3P (CPU 1) 25 °C
Graphics
ELEFW2217M (1920x1080@60Hz)
8192MB ATI Radeon RX 570 Series (MSI) 22 °C
Storage
223GB KINGSTON SUV400S37240G ATA Device (SATA-2 (SSD)) 25 °C
931GB Western Digital WDC WD10JPVX-11JC3T0 ATA Device (SATA ) 24 °C
Optical Drives
ATAPI iHAS324 W ATA Device
Audio
Realtek High Definition Audio

 

Fascinating temps wile e. Very low.

On several PCs I have around, the standard seems to be about 33 C for the processor with HDDs 28-35. Let us know if you care to share your secrets. Are you using high end fans?

I bought a super cool laptop on ebay and decided to step up for a lap cooler with a single 10" fan. The cooler was only $20, but it makes a 10C difference with video running. Very happy to have the cooler which coolly (no pun intended) runs off USB. I can carry it around. Not surprised to see improvement from you adding fans to your system, but I haven't seen 7 C from a processor before Good stuff.

 

Well the computer case i have is a HAF Cooler Master HAF 912 case.http://us.coolermaster.com/product/Detail/case/mid-tower/haf-912.html

I have two fans on the top sucking out hot air.Back Fan Sucking out hot air.

I am using a Aftermarket cooler that has one fan blowing air through it.Taking the heat off the RAM sticks.No side panel fan.Have two fans blowing air into case from the bottom front.

These are the temps under load.
Operating System
Windows 7 Professional 64-bit SP1
CPU
AMD FX-8350 30 °C
Vishera 32nm Technology
RAM
16.0GB Dual-Channel DDR3 @ 803MHz (9-9-9-24)
Motherboard
Gigabyte Technology Co. Ltd. 970A-DS3P (CPU 1) 34 °C
Graphics
ELEFW2217M (1920x1080@60Hz)
8192MB ATI Radeon RX 570 Series (MSI) 57 °C
Storage
223GB KINGSTON SUV400S37240G ATA Device (SATA-2 (SSD)) 26 °C
931GB Western Digital WDC WD10JPVX-11JC3T0 ATA Device (SATA ) 26 °C
Optical Drives
ATAPI iHAS324 W ATA Device
Audio
Realtek High Definition Audio

I plan on buying extra couple fans that are needed.I buy fans that have a higher CFM or Air flow.All my fans are 120mm fans.

Edit: I all so use a manual speed fan controller on my case i bought a couple years ago.To get the fans to spin at max speed.And not through mother board.Only fan connected through mother board is the CPU fan.

 

Always wanted one of those mini liquid coolers. They look amazing. Yours must be working well with those temps. Those are really great so you must be getting great performance. Long as it's not too loud, sounds like it would be a blast to use.

My favorite PC here has an 80 mm fan in front, CPU fan, and an 80 mm at the back. It's kind of loud, but the temps are always very steady, and the PC runs really well when it's not under really heavy video type loads. Just wish it wasn't such a weird board...4 GB max RAM and only single channel mem, yet it supports core 2 quad of all things and all the way up the chain (Q9400 in this one). It's the PC I have stability problems with at times for now...but maybe there could be a new board in its future. Thankfully there is a DDR3 capable board that will take the Q9400 and allow for 8 GB

 

I don't have water cooling lol.

These temps are from just fans.

 

Mine is full water cooled from the CPU to memory sticks down to graphics card. AMD A8 6600 Quad Core overclocked at 4.5Ghz . 16GB Ram DDR3 Dual Channel. Gigabyte GTX 1060 Windforce OC 6GB GDDR5 Graphics Card. 1TB Sata 3 HDD and 2 Extenal HDD's 4TB and 2TB. Running Windows 10 64Bit.

 

What Temps is your system at.

 

My CPU is at 24C. Mobo is at 30C. Graphics Card is at 23C and HDD's are at 26C.

 

Averages less power consumption at basic tasks than 4 old school light bulbs.



20C CPU, cooler 34C, RAM 37c, GPU 39C

Ambient temperature: 67F

 

Is your system water cooled or air cooled.I was thinking about installed one of them corsair water blocks for my cpu.

This is my system after a week of tweaking and letting the Thermal paste bond.This is not at full load.My cpu might spike up to 20 to 30 °C but than it will drop after.The normal Speed of the cpu is 4.0ghz but goes into turbo mode at 4.2 i think.

Operating System
Windows 7 Professional 64-bit SP1
CPU
AMD FX-8350 7 °C
Vishera 32nm Technology
RAM
16.0GB Dual-Channel DDR3 @ 803MHz (9-9-9-24)
Motherboard
Gigabyte Technology Co. Ltd. 970A-DS3P (CPU 1) 27 °C
Graphics
ELEFW2217M (1920x1080@60Hz)
Hanns.G HW173ñ (1440x900@60Hz)
8192MB ATI Radeon RX 570 Series (MSI) 27 °C
Storage
223GB KINGSTON SUV400S37240G ATA Device (SATA-2 (SSD)) 26 °C
931GB Western Digital WDC WD10JPVX-11JC3T0 ATA Device (SATA ) 25 °C
Optical Drives
ATAPI iHAS324 W ATA Device
Audio
Realtek High Definition Audio

Core Speed Multiplier Bus Speed Rated Bus Speed Temperature Threads
Core 0 4118.9 MHz x 20.5 200.9 MHz 2411.0 MHz 8 °C APIC ID: 0
Core 1 4118.9 MHz x 20.5 200.9 MHz 2411.0 MHz 8 °C APIC ID: 1
Core 2 4118.9 MHz x 20.5 200.9 MHz 2411.0 MHz 8 °C APIC ID: 2
Core 3 4118.9 MHz x 20.5 200.9 MHz 2411.0 MHz 8 °C APIC ID: 3
Core 4 4118.9 MHz x 20.5 200.9 MHz 2411.0 MHz 8 °C APIC ID: 4
Core 5 4118.9 MHz x 20.5 200.9 MHz 2411.0 MHz 8 °C APIC ID: 5
Core 6 1406.4 MHz x 7.0 200.9 MHz 2411.0 MHz 8 °C APIC ID: 6
Core 7 4118.9 MHz x 20.5 200.9 MHz 2411.0 MHz 8 °C

Fan Speed 1175 RPM
Bus Speed 200.9 MHz
Rated Bus Speed 2411.0 MHz
Stock Core Speed 4000 MHz
Stock Bus Speed 200 MHz
Average Temperature 7 °C

FYI the cores are completely unlocked by amd.

 

Try using software that reads the CPU temp. sensor correctly

Maybe Speccy or HWiNFO64?