Topcom Webt@lker 5000 Skype-Phone

Hi all Networking fans who loves to Log themselves into Cyberspace.

I am the lucky and privileged owner of a Topcom Webt@lker 5000 VoIP
phone with Skype, which my Brother gave my about 2 years ago, but
since I was without a Notebook nor did I have a Modem, was unable to enjoy.

Now that I have all 3 of them, I am anxious to make it work, and this is
where the Major Geeks Networking Crew comes in.

I have tried just about all, form trying myself to searching the web, but I
found nothing which could sort out the mystery, there simply are no tutorials
on the Net.

My equipment:

Notebook HP G42 245BR (brazil)

Pentium T4500 @ 2.30 GHz Dual Core

HSPA Sierra Wireless AirCard USB 305 modem

AT&T Communication Manager, V. 7.01.0030.0 (ACM)

Tim chip 3G (sim card), speed less than 100 kbit/s (2G), slightly faster than
the good old k56 modem

ISP tim.com.br

Webtalker 5000, software V. 1.4.111.1672, Hardware V 3.1

Windows Se7en x64 Home Premium

Realtek PCIe FE Family Controller

Sierra Wireless HSPA Network Adapter

1 Ethernet cable

Did I forget anything?

Some information about the settings within the webt@lker 5000:

Hardware:

USB connection (not used)

LAN connection

WAN connection

Software:

Network Proxy:

Select proxy host type:

No proxy
Https
Socks5

Port:
443

Authentication:
Yes/No

Username:
*******

Password:
*******

Skype ports:
50(or other)

Network settings:

Current status:

Connection mode:
Static IP

IP address:
169.254.19.238

General information and location of 169.254.19.238:
IPv4 address: 169.254.19.238
IPv6 address: ::ffff:a9fe:13ee
Host name: Reserved*
Reverse DNS: Reserved*
Country: Reserved*

* Reserved for specific non-unicast purposes

Subnet mask:
255.255.0.0

Default gateway:
n/a

Primary DNS:
n/a

secondary DNS:
n/a

DHCP setting:

Enable DHCP?
Yes/NO

Static IP settings:

Enable static IP

Settings:

IP address:
169.254.19.238

Subnet mask:
255.255.0.0

Default gateway:
1.1.1.1

Primary DNS:
1.1.1.1

Secondary DNS:
2.2.2.2

PPPoE(Dynamic):

Enable PPPoE(Dynamic):

Settings:

PPPoE user name:
********

PPPoE password:
********

PPPoE(Static):

Enable PPPoE(Static) (grey)

Settings:

IP address:
n/a

Subnet mask:
n/a

Default gateway:
n/a

Primary DNS:
n/a

secondary DNS:
n/a

END.

Now to my question... How do I make it work?

Thanks,



Wrenchman