Trouble updating bios

OK. First off The installation goes well, until its complete and i reboot. I do waht it says at the bottom. But my bios doesnt update or change.


(8. If you see the following message during the restart of your PC, continue with the remaining steps; otherwise you are done with the update.

Default BIOS settings have been loaded due to BIOS update or checksum issue.

9. Press and hold F1 for a few seconds to open the BIOS Setup.

10. Press F5 for a few seconds, choose YES, and then press Enter to load the BIOS defaults. (Use the arrow keys to choose YES, if necessary.)

11. Press F10 for a few seconds, choose YES, and then press Enter to exit the BIOS Setup and save your changes. (Use the arrow keys to choose YES, if necessary.)

12. Press Enter to confirm the save.

13. If you see a System Settings Change message prompting you to restart your PC, click YES to restart the PC again.


* Download file(s) to install later
























Installation Instructions:

1. Download the BIOS update.

2. Double-click the BIOS update icon and then click NEXT.

3. Accept the license terms and then click NEXT.

4. If an Overwrite Protection message appears, click YES TO ALL.

5. Click OK at the Windows Based BIOS Update window.

6. Click YES at the next Windows Based BIOS Update window and then wait for the update to complete.

7. At the Windows Based BIOS Update window, click YES to restart your PC.

8. If you see the following message during the restart of your PC, continue with the remaining steps; otherwise you are done with the update.

Default BIOS settings have been loaded due to BIOS update or checksum issue.

9. Press and hold F1 for a few seconds to open the BIOS Setup.

10. Press F5 for a few seconds, choose YES, and then press Enter to load the BIOS defaults. (Use the arrow keys to choose YES, if necessary.)

11. Press F10 for a few seconds, choose YES, and then press Enter to exit the BIOS Setup and save your changes. (Use the arrow keys to choose YES, if necessary.)

12. Press Enter to confirm the save.

13. If you see a System Settings Change message prompting you to restart your PC, click YES to restart the PC again.


* Download file(s) to install later:

 

Well seeing that my current bios is: System BIOS Date 08/31/04
And the one im wanting to up date from the HP site for my motherboard is.
2004-09-10 . I guess its newer? Check it out. http://h10025.www1.hp.com/ewfrf/wc/...product=404643&dlc=en&softwareitem=pv-20606-2

Thanks!

 

still wont work...

 

No im not, but i would if my bios would let me.