Unable To Burn With Nero 5.5.10.56

Discussion in 'Software' started by Titler, Oct 7, 2004.

  1. Titler

    Titler Private E-2

    Hello all, first post here, so forgive me if I make some netiquette errors;

    Ok, I found this board because a Google search for my problem turned up recent thread here with the same problem;

    http://forums.majorgeeks.com/showthread.php?t=41042

    The history of my machine is this; I purchased it a few years back as an OEM package from Tiny. It came with Nero 5.0.3.8, and burned fine until last year. Eventually the old CD-RW collapsed, and I now have a LiteOn drive inside. It burned fine for a month or so, then refused to burn due to Session Fixation and another error I cannot recall off hand. I have updated to 5.5.10.56 after deleting entirely the previous version of Nero with the recommended cleaner tools, and also tried to use a new install of various free online burners (whilst Nero remains deleted) to no avail.

    My machine also has problems reading from the E:\ drive when it's the burner... I have removed the D:\ drive and placed the LiteOn into that bay, in case it was the IDE cable, but it does not burn there either. Thus I suspect it's either some software conflict with all burners that I cannot identify, or a problem with my motherboard. I shall be upgrading my mb soon (when PCPARTS gives me my money back so I can reorder with someone else, grrrr.... ) but can anyone see from the two following error logs if I'm likely to have the burning problem even after that?

    Thanks for your help...

    Log 1.)

    Windows 98 4.90 (ME)
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
    Nero Version: 5.5.10.56
    Recorder: <LITE-ON LTR-52327S> Version: QS03 - HA 0 TA 1 - 5.5.10.56
    Adapter driver: <ESDI_506> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <LG DVD-ROM DRD8120B>Version: 1.04 - HA 0 TA 0 - 5.5.10.56
    Adapter driver: <ESDI_506> HA 0
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    LG DVD-ROM DRD8120B (Target 0, D:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
    LITE-ON LTR-52327S (Target 1, E:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523704kB)
    Free physical memory: 197MB (201804kB)
    Memory in use : 46 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Enabled (1)
    Wizard: On

    19.9.2004
    CD-ROM (ISO)
    19:38:49 #1 Text 0 File Isodoc.cpp, Line 7604
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    19:38:49 #2 Phase 90 File dlgbrnst.cpp, Line 1655
    Buffer Underrun Protection activated

    19:38:49 #3 Text 0 File Reader.cpp, Line 115
    Reader running

    19:38:49 #4 Text 0 File Writer.cpp, Line 125
    Writer LITE-ON LTR-52327S running

    19:38:49 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
    First writeable address = 0 (0x00000000)

    19:38:49 #6 Text 0 File Burncd.cpp, Line 3773
    Turn on Track-At-Once, using CD-R/RW media

    19:38:49 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
    Setup items (original item values)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 11387 (11387) = #11387/2:31.62
    relocatable, CD pos for caching/writing not required/required, no patch infos
    --------------------------------------------------------------

    19:38:51 #8 Text 0 File DlgWaitCD.cpp, Line 229
    Last possible write address on media: 359844 (79:59.69)
    Last address to be written: 11386 ( 2:33.61)

    19:38:51 #9 Text 0 File DlgWaitCD.cpp, Line 234
    Write in overburning mode: FALSE

    19:38:51 #10 Text 0 File DlgWaitCD.cpp, Line 1703
    Recorder: LITE-ON LTR-52327S;
    CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
    ATIP Data:
    Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

    19:38:51 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
    Prepare recorder LITE-ON LTR-52327S for write in TAO
    DAO infos:
    ==========
    MCN:
    TOCTYPE: 0x0 Session Closed, CD not fixated
    Tracks 1 to 1:
    TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 23627776

    19:38:51 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
    Removed 2 run-out blocks from end of track 1.

    19:38:51 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 11387 (11387) = #11387/2:31.62
    relocatable, CD pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 11385 blocks [LITE-ON LTR-52327S ]
    --------------------------------------------------------------

    19:38:51 #14 Phase 24 File dlgbrnst.cpp, Line 1655
    Caching of files started

    19:38:52 #15 Phase 25 File dlgbrnst.cpp, Line 1655
    Caching of files completed

    19:38:52 #16 Phase 36 File dlgbrnst.cpp, Line 1655
    Burn process started at 52x (7,800 KB/s)

    19:38:53 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
    Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

    19:38:53 #18 Text 0 File Mmc.cpp, Line 19546
    Set BUFE: supported -> ON , SMART-BURN : ON

    19:39:18 #19 Text 0 File ThreadedTransfer.cpp, Line 222
    all writers idle, stopping conversion

    19:39:22 #20 Text 0 File Mmc.cpp, Line 14537
    <LITE-ON LTR-52327S > start Close Session

    19:40:28 #21 Phase 37 File dlgbrnst.cpp, Line 1655
    Burn process completed successfully at 52x (7,800 KB/s)

    19:40:28 #22 Phase 78 File dlgbrnst.cpp, Line 1655
    Data verification started

    19:40:38 #23 SCSI -1033 File Cdrdrv.cpp, Line 1243
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    19:40:40 #24 SCSI -1033 File Cdrdrv.cpp, Line 1243
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    19:40:41 #25 SCSI -1033 File Cdrdrv.cpp, Line 1243
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    19:40:42 #26 SCSI -1033 File Cdrdrv.cpp, Line 1243
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    19:40:43 #27 SCSI -1033 File Cdrdrv.cpp, Line 1243
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    19:40:45 #28 SCSI -1033 File Cdrdrv.cpp, Line 1243
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x01
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x04 0x01

    19:40:46 #29 SCSI -1076 File Cdrdrv.cpp, Line 1243
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x28
    Sense Qual: 0x00
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x28 0x00

    19:41:06 #30 VERIFYERR 10 File UDFCompilationImpl.cpp, Line 6405
    Cannot mount the written CD
    "LITE-ON LTR-52327S" (H:0, T:1)

    19:41:06 #31 Phase 81 File dlgbrnst.cpp, Line 1655
    Data verification failed

    19:41:07 #32 Text 0 File Scsicmd.cpp, Line 406
    SCSI not using temporary buffers
    20 out of 20 temporary buffers allocated


    Existing drivers:
    File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 12:55:38
    File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 24/01/2003 23:28:52
    File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 24/01/2003 23:28:52
    File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 02/03/2001 20:55:54
    File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00

    Registry Keys:

    Log 2.)

    Windows 98 4.90 (ME)
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 17:00:00
    Nero Version: 5.5.10.56 (Nero Express)
    Recorder: <LITE-ON LTR-52327S> Version: QS03 - HA 0 TA 1 - 5.5.10.56
    Adapter driver: <ESDI_506> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <LG DVD-ROM DRD8120B>Version: 1.04 - HA 0 TA 0 - 5.5.10.56
    Adapter driver: <ESDI_506> HA 0
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    LG DVD-ROM DRD8120B (Target 0, D:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
    LITE-ON LTR-52327S (Target 1, E:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523704kB)
    Free physical memory: 4MB (4780kB)
    Memory in use : 64 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Enabled (1)
    Wizard: On

    28.9.2004
    CD-ROM (ISO)
    12:51:03 #1 Text 0 File Isodoc.cpp, Line 7604
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    12:51:03 #2 Phase 90 File dlgbrnst.cpp, Line 1655
    Buffer Underrun Protection activated

    12:51:03 #3 Text 0 File Reader.cpp, Line 115
    Reader running

    12:51:03 #4 Text 0 File Writer.cpp, Line 125
    Writer LITE-ON LTR-52327S running

    12:51:03 #5 ISO9660GEN -11 File geniso.cpp, Line 4571
    First writeable address = 0 (0x00000000)

    12:51:03 #6 Text 0 File Burncd.cpp, Line 3773
    Turn on Track-At-Once, using CD-R/RW media

    12:51:03 #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
    Setup items (original item values)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 150660 (150660) = #150660/33:28.60
    relocatable, CD pos for caching/writing not required/required, no patch infos
    --------------------------------------------------------------

    12:51:04 #8 Text 0 File DlgWaitCD.cpp, Line 229
    Last possible write address on media: 359844 (79:59.69)
    Last address to be written: 150659 (33:30.59)

    12:51:04 #9 Text 0 File DlgWaitCD.cpp, Line 234
    Write in overburning mode: FALSE

    12:51:04 #10 Text 0 File DlgWaitCD.cpp, Line 1703
    Recorder: LITE-ON LTR-52327S;
    CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
    ATIP Data:
    Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
    Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

    12:51:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
    Prepare recorder LITE-ON LTR-52327S for write in TAO
    DAO infos:
    ==========
    MCN:
    TOCTYPE: 0x0 Session Closed, CD fixated
    Tracks 1 to 1:
    TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 308858880

    12:51:05 #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
    Removed 2 run-out blocks from end of track 1.

    12:51:05 #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 150660 (150660) = #150660/33:28.60
    relocatable, CD pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 150658 blocks [LITE-ON LTR-52327S ]
    --------------------------------------------------------------

    12:51:05 #14 Phase 24 File dlgbrnst.cpp, Line 1655
    Caching of files started

    12:51:05 #15 Phase 25 File dlgbrnst.cpp, Line 1655
    Caching of files completed

    12:51:05 #16 Phase 36 File dlgbrnst.cpp, Line 1655
    Burn process started at 24x (3,600 KB/s)

    12:51:06 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
    Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

    12:51:06 #18 Text 0 File Mmc.cpp, Line 19546
    Set BUFE: supported -> ON , SMART-BURN : ON

    12:51:24 #19 SCSI -1135 File Cdrdrv.cpp, Line 1447
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x02780000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x09 0x15 0x00 0x00 0x1F 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    12:51:24 #20 MMC -1135 File Writer.cpp, Line 333
    Write error

    12:51:24 #21 Text 0 File ThreadedTransfer.cpp, Line 222
    all writers idle, stopping conversion

    12:51:25 #22 Text 0 File ThreadedTransfer.cpp, Line 216
    conversion idle, stopping reader

    12:51:25 #23 CDR -201 File WriterStatus.cpp, Line 194
    Invalid write state

    12:51:25 #24 TRANSFER -18 File WriterStatus.cpp, Line 194
    Could not perform EndTrack

    12:51:25 #25 Text 0 File Mmc.cpp, Line 14537
    <LITE-ON LTR-52327S > start Close Session

    12:51:27 #26 SCSI -1176 File Cdrdrv.cpp, Line 1243
    SCSI Exec, HA 0, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x72
    Sense Qual: 0x00
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x00

    12:51:27 #27 MMC -1176 File WriterStatus.cpp, Line 233
    Session fixation error

    12:51:27 #28 TRANSFER -19 File WriterStatus.cpp, Line 233
    Could not perform Fixation

    12:51:27 #29 Text 0 File WriterStatus.cpp, Line 242
    falling back to disc fixation

    12:51:27 #30 Text 0 File Mmc.cpp, Line 14537
    <LITE-ON LTR-52327S > start Close Session

    12:51:27 #31 Phase 38 File dlgbrnst.cpp, Line 1655
    Burn process failed at 24x (3,600 KB/s)

    12:51:27 #32 Text 0 File Scsicmd.cpp, Line 406
    SCSI not using temporary buffers
    20 out of 20 temporary buffers allocated


    Existing drivers:
    File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 12:55:38
    File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 24/01/2003 23:28:52
    File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 24/01/2003 23:28:52
    File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 02/03/2001 20:55:54
    File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 17:00:00
    File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 17:00:00
    File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 17:00:00

    Registry Keys:
     
    Titler, Oct 7, 2004
    #1

MajorGeeks.Com Menu

Downloads All In One Tweaks \ Android \ Anti-Malware \ Anti-Virus \ Appearance \ Backup \ Browsers \ CD\DVD\Blu-Ray \ Covert Ops \ Drive Utilities \ Drivers \ Graphics \ Internet Tools \ Multimedia \ Networking \ Office Tools \ PC Games \ System Tools \ Mac/Apple/Ipad Downloads

Other News: Top Downloads \ News (Tech) \ Off Base (Other Websites News) \ Way Off Base (Offbeat Stories and Pics)

Social: Facebook \ YouTube \ Twitter \ Tumblr \ Pintrest \ RSS Feeds