USB Gamepad causing random crashes?

Well this is rather weird but, I find that every since I got this game pad (XBOX360 Controller for Windows) my PC has randomly reboot twice. I guess it's logically since when I do plug it in or unplug it this happens sometimes...but I just want another opinion cause I'm not really sure.

I mean I really have no reason to suspect my PSU, it is however 8 months old (PSU is in my sig), but for the simple fact that when I have the game pad in when I restart the PC it takes almost 10 seconds longer to boot on Setup screen (First screen when you boot) because the meter gets stuck at I guess you could call it 80%.

When it's out everything is fine, when I game without it I don't have any crashes. Heat is not an Issue even though I can only speak for my GPU on that being that it's the only component with a sensor,(38C Idle 58 Stressed), I have 3 case fans, 1 GPU blower and a Main case blower and a floor fan blowing air into a hole in the side, also with my room temp being around 60-61 Degree's. (Note that 2 Case fans and the main case blower are running on a separate PSU).

I would give a reading of my rail voltages if I could, however neither component shows voltages nor do the BIOS so I guess I can't really tell unless I get an electrician to check but that is risky.

 

May be a driver problem. Did you try to reinstall the driver? If it does not help the XBOX360 controller for Windows may be damaged hope you fix it

 

Well that's the problem they don't come with drivers, you have to download them from Microsoft, and they suck. Which is most likely the problem either way I knew it was a bad idea when I couldn't re-map the buttons, now this just compounds it. Yeah I reinstalled them numerous times same result, I think I'm going to run the PC for a week or two and see what happens, if I don't crash then I'll know.