Using orthos to test my comp for stability...where is the stress.txt?

I am using orthos to test my comp for stability(OCed it a bit).

Code:

Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1789 Time: 15
CPU: 3199MHz FSB: 400MHz [399MHz x 8.0 est.]
9/17/2007 1:04 AM 
Launching 2 threads...
1:Using CPU #0
2:Using CPU #1
2:Beginning a continuous self-test to check your computer.
2:Press Stop to end this test.
1:Beginning a continuous self-test to check your computer.
1:Press Stop to end this test.
2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
1:FATAL ERROR: Rounding was 0.5, expected less than 0.4
1:Hardware failure detected, consult stress.txt file.
1:Torture Test ran 0 minutes 17 seconds - 1 errors, 0 warnings.
1:Execution halted.

2:Torture Test ran 0 minutes 18 seconds - 0 errors, 0 warnings.
2:Execution halted.

The problem is, there is NO stress.txt file in the Orthos folder. Where am i supposed to be looking?

 

Anyone knows?

 

Has no one here used Orthos before?

 

when u find it...let me know. If you read the log file in the orthos folder, it give you the sme info as on the test window. It also refers you to the stress.txt file.:confused