VPN Problem

May be a dumb question, kind of a rookie at networking. I have a network on a lan (IPs are 223.223.223.101-115) connected via DLink switch. I am trying to set up a VPN to reach this network remotely. I installed a DLink VPN/Router and configured it for a client connection. I connected the VPN router WAN port to the DSL modem (bridge mode with static IP). I connected one of the other router ports to the network switch above. The Router IP is 192.168.0.1. I am able to connect to the router through a VPN tunnel however, once connected I cannot Ping the network I am trying to reach. I can ping the router though but can't see the network.

Any help would be appreciated.

Ray

 

Wouldn't the router need to be on the 223 network?
Maybe I am reading this wrong.

 

Thanks for the response. I thought of that too and changed the router IP to 223.223.223.200 and then I could not connect to the VPN!
Maybe it is something in my VPN IPSEC Policy:
Name: Pantel
Local Net/Mask: 192.168.0.0/24
Remote User: checked
Remote local lan: Blank
Authentication: Pre-shared key
XAUTH: checked
Server Mode: checked
Local ID: IP Address :64.231.*.*
Remote ID: default

Phase 1
Main Mode: checked
Nat Enabled: checked
Keep alive: checked
DH Group: 2modp-1024
Cypher: 3DES
Hash: MD5
IKE lifetime: 28800 sec

Phase 2
PFS enabled: checked
PFS DH Group: 2modp-1024
Cypher: 3DES
Hash: MD5
ipsec lifetime: 3600 sec

After entering all this I think I found the problem. The local Net/mask above would have to be changed to: 223.223.223.0/24.
I will try that.

Let me know if you concur.

thanks