what conector goes where?

bunkachunk · Sep 30, 2009

I have a fic mobo, modle # km266-8235, socket a 462, compaq presario s 3000nx. My question is this, i have a new case, nzxt beta, and i need to hook up the wires coming from the power, re-set, hdd-led, and two other led wires ones blue and ones white. See attachments. Iv'e been to fic's web site for a manual, but no luck finding one . Maybe someone else can. Which pins are the ground? And which one's are hot? Do they go top to bottom, or side by side? My old case used a conector to hook up to this spot.tryed to use it but it's a no go. Hp support is a dead end to. Any help or web site will be great. Thank you very much, bunkachunk..............

Major Attitude · Sep 30, 2009

They are as marked, I have never looked for positive or negative. In other words PW_LED is the top 2, left to right. HDD_LED is the bottom 2 pins left to right. Frankly, it has been my experience that this is hard to screw up and you really can't do any damage. Once hooked up, you want to look to see if the power and led lights are on, if not, then they are backwards. Typically, I just make sure that if the lettering on on motherboard connector is on one side, then all go to the same side.

bunkachunk · Sep 30, 2009

Re: what connector goes where?

Hi, thanks major attitude, the light are on. I thought i would short something out if i cross wired. Thanks again, bunkachunk...

Log in or Sign up

what conector goes where?

bunkachunk Private E-2

Attached Files:

1.jpg

2.jpg

3.jpg

4.jpg

Major Attitude Co-Owner MajorGeeks.Com Staff Member

bunkachunk Private E-2