Which Case for Denver Plus 11 MB

Hi,

I currently have this motherboard:

Denver 11 Plus Motherboard

Form Factor
µATX Form Factor
24.4 cm x 24.4 cm
CPU Support
Socket T (LGA775)
Intel Core 2 Quad , Core 2 Duo, Pentium Dual-Core , and Celeron processors with a maximum TDP of 95W.
Up to 1333 MHz/s Front Side Bus
Chipset
NVIDIA GeForce 7100 with nForce 630i
System Memory
2x 240-pin DDR2 SDRAM DIMM slots
DDR2 533 / DDR2 677 / DDR2 800 DIMMs
Supports up to 4 GB system memory RAM
Video
NVIDIA GeForce 7100
Maximum video memory in BIOS is 256 MB shared
Total maximum video memory 1535 MB using TurboCache
Audio
Realtek ALC 888S audio codec
High Definition Audio subsystem
7.1 channel support
Network
Realtek RTL8101E Ethernet Controller
10/100 Mbit
Expansion Slots
1x PCI Express 16X
1x PCI Express 1X
2x PCI
Drive Support
1x IDE
4x SATA

I'm wondering what case and PSU would you recommend for this motherboard? I don't know much about cases! I currently have a Packard bell P4 chassis, but I'm moving country - transporting the whole thing would be too expensive, so i'm gonna take it apart and buy a new case later on.

Here are my full PC specifications:

http://support.packardbell.com/global/item/index.php?pn=PV.U2402.006&g=1400

P.S: I'd rather not spend a great deal of cash on the new case, i'm just after something that will fit well with my components & support the right PSU.

Thx in advance for any help regarding this.

 

that's a micro atx board, and any run of the mill case that you can buy will take it. my preference would be a mid-tower, to allow for good airflow, and less of a chance of overheating.

as for PSU, look at what it currently has, and get something that is at least equal to the current one.

 

thanks for the reply,
appreciate the advice.. i'll follow that

pzz

 

As for the case, i would second that a mid-tower would suit your needs.

The NZXT Gamma is one of the best, check it out!

And it's only £35 ($40).