zlclient.exe no disk & autotbar.exe no disk errors on start-up?

System info:
HP a350n
XP Home Edition Version 2 w/ SP2
Pentium 4 CPU 2.8 GHz
512 mb RAM

Hello again,
Upon start-up I am receiving 2 different errors with 3 options: try again, continue, & cancel. The error boxes have big red circles with a white X through them off to the side.
The 1st error is: zlclient.exe no disk
There is no disk in the drive. Please insert disk into drive \Device\Harddisk4\DR14
The 2nd error is: AutoTBar.exe
(Same info)
These errors only started showing up after I installed SP2. I have no idea what they mean or what program they even pertain to. Before I installed SP2, I updated all the drivers needed to work with SP2. Is it possible that I have missed one? Any help is greatly appreciated!!

 

Hey Scout,

1. The 1st error is: zlclient.exe no disk
Do you have some sort of card reader for pictures? If so then reinstall the driver's for this device and it should solve that problem.

If it isnt a card reader it might be an external device like a Hard Drive or some device of that sort that Zonealarm recognizes as a drive. Anything connected to USB's and have you installed the newest drivers?

2. The 2nd error is: AutoTBar.exe
This is the HP VIEW toolbar. It's not really required at startup, I would use msconfig and uncheck it at startup and see if that stops the error.

Also, if it is a seperate HP program that you installed try reinstalling.

Steve

 

zclient.exe is zone alarm.

Try reinstalling ZA and see how that works out.

At least, I think it is ZA.