HP 3COM 4510G-48 Policy Based Routing multiple gateway help

Hi People,



I've recently purchased a 4510G-48 HP 3COM switch and have got some questions with regards to the configuration.





Currently, I have configured 4 VLAN's - VLAN 100, 200, 300, and 400 each with their own interface IP on the 172.16 network subnetted into 6. so VLAN100: 172.16.32.253 VLAN200: 172.16.64.253 and so on.



The problem I have is setting a default route to the gateway as the gateway will not support trunking. Due to this, it also has 4 gateway IPs with addresses as: VLAN100: 172.16.32.254 VLAN200: 172.16.64.254



I need to find a way of routing 0.0.0.0 0.0.0.0 traffic coming from each subnet to their respective gateway addresses: i.e



172.16.32.0/19 external traffic routes to: 172.16.32.254

172.16.64.0/19 external traffic routes to: 172.16.64.254





It was my understanding that you should set up an ACL basic group to assign the source address group (although I dont understand the wildcard settings?) and a route policy with if-match rules to the ACL group and a destination group (0.0.0.0 0.0.0.0)



However, I'm having real problems getting this to work. Does anyone have any idea how to do this?



Many thanks,



Shaun