Asus K8V-MX Motherboard front panel connectors

:confused Hi,

I have a ezCool ATX Midi case and I am trying to connect up the front panel connectors for my asus k8v-mx motherboard. The trouble is the case leads labels don't match up with the motherboard ones. ie IDE_LED RESET etc.

I have 2 x VCC leads, 1 -D,1 + D, Mic in, mic power,r-out r-ret,l-out l ret, HDD led, powersw, that just don't match up with the descriptions on the board?? Can anyone help me out with this? Thanks!

The board has
1 PLED +
2 NA
3 PLED -
4 NA
5 NA
6 NA
7 + 5V
8 Ground
9 ground
10 speaker

11 +5v
12 IDE led
13 NA
14 NA
15 NA
16 pwr
17 ground
18 NA
19 reset
20 ground

 

I think you need this:http://dlsvr02.asus.com/pub/ASUS/mb/sock754/K8V-MX/e2125_k8v-mx.pdf
On page 26 you will find how to connectfront panel to your mobo.
Good Luck!!!!

 

Thanks for the link.... my manual that came with the mobo for some reason has French, Italian, Spanish, Dutch, and Russian. English is much better! I have enough of a headache looking at all these cables. Anyone know what the 2 leads marked vcc are?

 

I have the same case and pretty much the same probolem, i aquired the the system from a friend and need to replace the asus mobo. Im replacing it with the Gigabyte GA-8I915PM mobo, but i need to know which lead is which (from the front panel) and where on the mobo to connect them to as i have not got that far in my course. any help would be much appreciated as i have searched high and low for the case manual and the mobo manual

Squiggles

 

Hi,

I am still having a problem with this as though the asus manual shows where the connectors go the tags for them don't relate or match up with the actual ez cool case tags for the appropriate cables. :confused

 

Hi Ennis,

Vcc in that case is same as saying +5 volts DC.

Good Luck, Jim