BIOS settings

i have a few settings in my new bios im not sure what to put:

1) CPU host freq (100-355): according to the manual it should be set to 200 for 800FSB speeds (which i did, just double checking dont want to damage anything).

2) AGP/PCI/SRC fixed: according to the manual it says "adjust AGP/PCI/SRC asychrohous with CPU"...currently it is set to 66/33/100 but there are like a bagillion choices.

3) Mem Freq for: currently set to auto. according to the manual it says
1.33 Memory Freq = Host Clock x 1.33
1.6 Memory Freq = Host Clock x 1.6
2 Memory Freq = Host Clock x 2
Auto = set mem freq by DRAM SPD data (default value)

 

all this should be detected and defaulted to the right settings, u shouldnt have to change anything??

but definitly leave memory at AUTO, that detects automaticaly!

 

hey man i have more to add, if ur MB will run at 800FSB, that doesnt ,mean ur processor does, make sure u find out what the FSB is on ur processor...most of the times.....

400Mhz FSB processor-frequency is 100Mhz
533Mhz FSB processor-frequency is 133Mhz
800Mhz FSB processor-frequency is 200Mhz

AGP/PCI/SRC fixed: 66/33/100 goes with the 533mhz processor-133Mhz freq.

but realy i think ur processor is a 533Mhz and its should be defualted to 133Mhz for frequency, just make sure u check ur processor!!!

PEACE!

 

its not 533 its 800. the prescott is the 800mhz FSB. ill scan the box if you want me to.

 

no need to scan, just set it to 200Mhz if its not already defualted there!

 

thanks for the help, if you can help here:

http://forum.majorgeeks.com/showthread.php?t=76891

that would be great (stumped)