Can you check these out

Now

1. Download this file - ComboFix
2. Double click combofix.exe & follow the prompts.
3. When finished, it will produce a log for you. Attach this log to your next reply

Note:

Do not mouseclick combofix's window while it is running. That may cause it to stall.



Please download and install Registrar Lite. Make sure you select a Majorgeeks download link and not the Authors!

Run Registrar Lite navigate to each of the following keys (one at a time) and take ownership of them (I explained how to do that further down).

To take ownership of the key do the following:

* Copy & Paste the registry key from above into the Address bar of Registrar Lite and hit the enter key. This will bring you to the registry key.
* Click-on Security in the top Menu
* Select Take Ownership
* Repeat these steps for all of the registry keys given above before continue to the next steps below.
* Now leave RegistrarLite running and continue
* Now run the fixME.reg REGISTRY PATCH below in this message.
* Tell me the results. Any error messages?
* Now in RegistrarLite click View and then Refresh
* Now navigate one at a time to each of the above keys we took ownership of to make sure they were deleted.
* If any of the keys still exist, move on down to PART 2 - Setting Permissions for Everyone below!.


[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_CMDSERVICE]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_CMDSERVICE\0000]
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\Root\LEGACY_CMDSERVICE]
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\Root\LEGACY_CMDSERVICE\0000]
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Enum\Root\LEGACY_CMDSERVICE]
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Enum\Root\LEGACY_CMDSERVICE\0000]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_NETWORK_MONITOR]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_NETWORK_MONITOR\0000]
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\Root\LEGACY_NETWORK_MONITOR]
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\Root\LEGACY_NETWORK_MONITOR\0000]
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Enum\Root\LEGACY_NETWORK_MONITOR]
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Enum\Root\LEGACY_NETWORK_MONITOR\0000]

Here is the Registry Patch

Now Copy the bold text below to notepad. Save it as fixME.reg to your desktop. Be sure the "Save as" type is set to "all files" Once you have saved it double click it and allow it to merge with the registry.

PART 2 - Setting Permissions for Everyone

Run the below if some of the registry keys still exist after running the above steps.

Now I want you to use Registar Lite again to navigate to each of the below keys (one at a time) by pasting them into the Address Bar and hitting return. But this time click the Security menu item and select Edit Permissions so we can change permissions to everyone ( I describe this down below the list of registry keys).

Quote:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_CMDSERVICE
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\Root\LEGACY_CMDSERVICE
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Enum\Root\LEGACY_CMDSERVICE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_NETWORK_MONITOR
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\Root\LEGACY_NETWORK_MONITOR
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Enum\Root\LEGACY_NETWORK_MONITOR

After click Edit Permissions , here is what I expect you to see in the Group or user names area of the form:

Everyone
SYSTEM

Select Everyone by clicking on it. Now at the bottom in the Permissions box click the check box for Full Control. The click Apply and then OK to get back to the main Registrar Lite screen. Nowright click on the registry key and select Delete. The click View and Refresh. Check to see if the registry key just deleted truly deleted. If so, move on to the next to work thru the whole list. If it does not delete, I want you to boot into safe mode and repeat these exact same steps to see if we can do it from safe mode.

Then reboot your PC!

Continue by downloading a tool we will need - Pocket KillBox

Save it to its own folder somewhere that you will be able to locate it later.

Run HijackThis and select the following lines but DO NOT CLICK FIX until you exit all browser sessions including the one you are reading in right now:

O2 - BHO: (no name) - {46A4E9D9-B30E-452A-8157-DBBEC8573B03} - C:\Program Files\VSAdd-in\VSAdd-in.dll
O2 - BHO: (no name) - {672E60AA-5E24-4E92-9F5C-5F35B55C83Ad} - C:\WINDOWS\System32\wvplgocf.dll
O2 - BHO: (no name) - {BDE265BE-F33E-411C-A078-23DF3F36A4BA} - C:\WINDOWS\ServicePackFiles\cpyss.dll
O2 - BHO: (no name) - {D38439EC-4A7F-42b4-90C2-D810D7778FDD} - C:\WINDOWS\system32\tdcgqudv.dll (file missing) G
O2 - BHO: (no name) - {F3044D71-CD2E-49DA-9311-272634F03E98} - C:\WINDOWS\System32\wvplgocf.dll G
O3 - Toolbar: &VSAdd-in - {74DD705D-6834-439C-A735-A6DBE2677452} - C:\Program Files\VSAdd-in\VSAdd-in.dll
O4 - HKLM\..\Run: [2chkdsk] rundll32.exe "C:\WINDOWS\system32\sndscqdf.dll",setvm
O20 - Winlogon Notify: cpyss - C:\WINDOWS\ServicePackFiles\cpyss.dll

After clicking Fix, exit HJT.

Now run Pocket Killbox by doubleclicking on killbox.exe
Choose Tools > Delete Temp Files and click Delete Selected Temp Files.
Then after it deletes the files click the Exit (Save Settings) button.
NOTE: Pocket Killbox will only list the added files it is able to find on the system. So when you do the below, if some files do not show in the list after pasting them in, just continue.

Select:

* Delete on Reboot
* then Click on the All Files button.*(or on the folders option)*
* Please copy the file paths below to the clipboard by highlighting ALL of them and pressing CTRL + C (or, after highlighting, right-click and choose copy):

C:\Program Files\VSAdd-in\VSAdd-in.dll
C:\WINDOWS\System32\wvplgocf.dll
C:\WINDOWS\ServicePackFiles\cpyss.dll
C:\WINDOWS\system32\tdcgqudv.dll
C:\WINDOWS\System32\wvplgocf.dll

* Return to Killbox, go to the File menu, and choose Paste from Clipboard.
* Click the red-and-white Delete File button. Click Yes at the Delete on Reboot prompt.

If you receive a PendingFileRenameOperations prompt, just click OK to continue (But please let me know if you receive this message!).

If Killbox does not reboot just reboot your PC yourself.

Now attach the below new logs and tell me how the above steps went.

1. GetRunKey
2. ShowNew
3. HJT

 

Run HijackThis and select the following lines but DO NOT CLICK FIX until you exit all browser sessions including the one you are reading in right now:

O2 - BHO: (no name) - {648867A9-CC0F-4F14-8316-B70C4FF30612} - C:\WINDOWS\ServicePackFiles\cpyss.dll
O4 - HKLM\..\Run: [2chkdsk] rundll32.exe "C:\WINDOWS\system32\ojyhaith.dll",setvm
O20 - Winlogon Notify: cpyss - C:\WINDOWS\ServicePackFiles\cpyss.dll

After clicking Fix, exit HJT.

Please copy the bold text below to notepad. Save it as fixME.reg to your desktop. Be sure the "Save as" type is set to "all files" Once you have saved it double click it and allow it to merge with the registry.

Run HijackThis and select the following lines but DO NOT CLICK FIX until you exit all browser sessions including the one you are reading in right now:

Now run Pocket Killbox by doubleclicking on killbox.exe
Choose Tools > Delete Temp Files and click Delete Selected Temp Files.
Then after it deletes the files click the Exit (Save Settings) button.
NOTE: Pocket Killbox will only list the added files it is able to find on the system. So when you do the below, if some files do not show in the list after pasting them in, just continue.

Select:

* Delete on Reboot
* then Click on the All Files button.*(or on the folders option)*
* Please copy the file paths below to the clipboard by highlighting ALL of them and pressing CTRL + C (or, after highlighting, right-click and choose copy):

C:\WINDOWS\SYSTEM32\locate.com
C:\WINDOWS\SYSTEM32\fdqcsdns.ini
C:\WINDOWS\SYSTEM32\htiahyjo.ini
C:\WINDOWS\SYSTEM32\jadandih.dll
C:\WINDOWS\SYSTEM32\nqvqvjjt.dll
C:\WINDOWS\SYSTEM32\ojyhaith.dll
C:\WINDOWS\SYSTEM32\lovqunpd.dll
C:\WINDOWS\SYSTEM32\rhhjpkxp.exe
C:\WINDOWS\SYSTEM32\wintisu32.exe


* Return to Killbox, go to the File menu, and choose Paste from Clipboard.
* Click the red-and-white Delete File button. Click the box to unregister .dll's. Click Yes at the Delete on Reboot prompt.

If you receive a PendingFileRenameOperations prompt, just click OK to continue (But please let me know if you receive this message!).

If Killbox does not reboot just reboot your PC yourself.

Now attach the below new logs and tell me how the above steps went.

1. GetRunKey
2. ShowNew
3. HJT

 

Use windows explorer to try to find and delete:
C:\WINDOWS\ServicePackFiles\cpyss.dll

If you are unsuccessful, use PocketKill Box to remove it after doing the below.

Run HijackThis and select the following lines but DO NOT CLICK FIX until you exit all browser sessions including the one you are reading in right now:

O2 - BHO: (no name) - {8CB2D5CB-A40A-4E17-A2EB-1AF3091A74B8} - C:\WINDOWS\ServicePackFiles\cpyss.dll
O20 - Winlogon Notify: cpyss - C:\WINDOWS\ServicePackFiles\cpyss.dll
After clicking Fix, exit HJT.

Please copy the bold text below to notepad. Save it as fixME.reg to your desktop. Be sure the "Save as" type is set to "all files" Once you have saved it double click it and allow it to merge with the registry.

Tell me how it went.

Now attach the below new logs and tell me how the above steps went.

1. GetRunKey
2. ShowNew
3. HJT

 

I see you have been running into problems removing those last few items. If you still did not get them removed after following TimW's last instructions, follow the steps below exactly and this should remove your problems.

First uninstall the Sunbelt CounterSpy trial since we are finished with it now! Then delete the below two folders which may be left behind by the uninstall:
C:\Documents and Settings\All Users\Application Data\Sunbelt Software
C:\Program Files\Sunbelt Software


Continue by downloading another tool we will need

- Process Explorer

Extract it to their its folder somewhere that you will be able to locate it later.

Make sure you have rebooted in Normal Mode (do not open any other processes)

Also make sure that one and only one Internet Explorer browser is opened up

Run Process Explorer

In the top section of the Process Explorer screen double click on winlogon.exe to bring up the winlogon.exe properties screen. Click on the Threads tab at the top.

Once you see this screen click on each instance of cpyss.dll once and then click the kill button. After you have killed all of the cpyss.dll under winlogon click ok. (If you do not find the dll, just continue on.)

Next double click on explorer.exe and again click once on each instance of cpyss.dll and kill it. (If you do not find the dll, just continue on.)

Next double click on iexplore.exe and again click once on each instance of cpyss.dll and kill it. (If you do not find the dll, just continue on.)

Now just exit Process Explorer.

Run HijackThis and select the following lines but DO NOT CLICK FIX until you exit all browser sessions including the one you are reading in right now:

R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =
O2 - BHO: (no name) - {8CB2D5CB-A40A-4E17-A2EB-1AF3091A74B8} - C:\WINDOWS\ServicePackFiles\cpyss.dll
O20 - Winlogon Notify: cpyss - C:\WINDOWS\ServicePackFiles\cpyss.dll

After clicking Fix, exit HJT.

Copy the bold text below to notepad. Save it as fixme.reg to your desktop. Be sure the "Save as" type is set to "all files" Once you have saved it double click it and allow it to merge with the registry.

Now run Pocket Killbox by doubleclicking on killbox.exe

• select File, Cleanup, Delete All Backups
• Choose Tools > Delete Temp Files and click Delete Selected Temp Files.
• Then after it deletes the files click the Exit (Save Settings) button.

NOTE: Pocket Killbox will only list the added files it is able to find on the system. So when you do the below, if some files do not show in the list after pasting them in, just continue.

Select:

• Delete on Reboot
• then Click on the All Files button.
• Please copy the file paths below to the clipboard by highlighting ALL of them and pressing CTRL + C (or, after highlighting, right-click and choose copy):

C:\WINDOWS\ServicePackFiles\cpyss.dll

• Return to Killbox, go to the File menu, and choose Paste from Clipboard.
• Click the red-and-white Delete File button. Click Yes at the Delete on Reboot prompt.

If you receive a PendingFileRenameOperations prompt, just click OK to continue (But please let me know if you receive this message!).

If Killbox does not reboot just reboot your PC yourself.

Now attach the below new logs and tell us how the above steps went.

1. GetRunKey
2. ShowNew
3. HJT

Make sure you tell us how things are working now!


Note: The VundoFix special procedure may work too if that is what you were going to try.

 

Download SmitfraudFix (c) S!Ri http://siri.urz.free.fr/Fix/SmitfraudFix.zip
Extract the content (a folder named SmitfraudFix) to your Desktop.

Open the SmitfraudFix folder and double-click smitfraudfix.cmd
Select option #1 - Search by typing 1 and press "Enter"; a text file will appear, which lists infected files (if present).
Please copy/paste the content of that report into your next reply.

Do NOT run any other option other than 1

Note : process.exe is detected by some antivirus programs (AntiVir, Dr.Web, Kaspersky) as a "RiskTool"; it is not a virus, but a program used to stop system processes. Antivirus programs cannot distinguish between "good" and "malicious" use of such programs, therefore they may alert the user.
http://www.beyondlogic.org/consultin...rocessutil.htm

Second Step:
Next, reboot your computer in Safe Mode by doing the following:
1) Restart your computer
2) After hearing your computer beep once during startup, but before the Windows icon appears, press F8.
3) Instead of Windows loading as normal, a menu should appear
4) Select the first option, to run Windows in Safe Mode
5) Choose your usual account.
Once in Safe Mode, open the SmitfraudFix folder again and double-click smitfraudfix.cmd
Select option #2 - Clean by typing 2 and press "Enter" to delete infected files.

You will be prompted : "Registry cleaning - Do you want to clean the registry ?"; answer "Yes" by typing Y and press "Enter" in order to remove the Desktop background and clean registry keys associated with the infection.

The tool will now check if wininet.dll is infected. You may be prompted to replace the infected file (if found); answer "Yes" by typing Y and press "Enter".

The tool may need to restart your computer to finish the cleaning process; if it doesn't, please restart it into Normal Windows.
A text file will appear onscreen, with results from the cleaning process; please copy/paste the content of that report into your next reply.
The report can also be found at the root of the system drive, usually at C:\rapport.txt

Warning: running option #2 on a non infected computer will remove your Desktop background.

Reboot

Attach new logs for :
ShowNew
GettRun
HJT

 

Run HijackThis and select the following lines but DO NOT CLICK FIX until you exit all browser sessions including the one you are reading in right now:

O4 - HKLM\..\Run: [SoundService] rundll32.exe "C:\WINDOWS\system32\xdaarbfw.dll",setvm

After clicking Fix, exit HJT.

Copy the bold text below to notepad. Save it as fixme.reg to your desktop. Be sure the "Save as" type is set to "all files" Once you have saved it double click it and allow it to merge with the registry.

Tell me how things are running.

 

Have you tried resetting all your IE settings to default?

 

Shut down all applications especially browsers and protection software. The try the below.


Now Copy the bold text below to notepad. Save it as fixME.reg to your desktop. Be sure the "Save as" type is set to "all files" Once you have saved it double click it and allow it to merge with the registry.

Did that help?

 

We deleted what Spybot did not delete! Why it could not delete is a mystery since it was rather easy to delete?


If you are not having any other malware problems, it is time to do our final steps:

1. If we used Pocket Killbox during your cleanup, do the below
   • Run Pocket Killbox and select File, Cleanup, Delete All Backups
2. If we used ComboFix you can delete the ComboFix.exe file and associated C:\combofix.txt log that was created.
3. If we user SDFix you can delete all the SDFix related files and folders from your Desktop or whereever you installed it.
4. If we used VundoFix, you can delete the VundoFix.exe file and the C:\VundoFix Backups folder and C:\vundofix.txt log that was created.
5. If we had your run FixWareOut, you can delete the Fixwareout.exe file and the C:\fixwareout folder.
6. If we had you run Avenger, you can delete all files related to Avenger now.
7. If we had you download any registry patches like fixme.reg or fixWLK.reg (or any others), you can delete these files now.
8. You can delete the ShowNew.Zip and GetRunkey.Zip files and the files that you extracted from the ZIP files. You can also delete the C:\newfiles.txt and C:\runkeys.txt logs that were created
9. If you are running Windows XP or Windows ME, do the below:
   • go back to step 8 of the READ & RUN ME to Disable System Restore which will flush your Restore Points.
   • Then reboot and Enable System Restore to create a new clean Restore Point.
10. After doing the above, you should work thru the below link:
    • How to Protect yourself from malware!