CD ROM and DVD ROM quit working shortly after reloading XP

I reloaded windows XP on myDesktop. When windows first initiated everything worked fine except that the video driver was not correct and I had very poor resolution on mu monitor. I had a disc with drivers for my motherboard an ASUS P4BGL-MX but because the resolution was so bad I am not sure If I installed the drivers in the correct order. At any rate after I installed the windows service Pack 3 from a CD I had burnt it on I noticed that the dvd and CD Rom wont read any more. I deleted them from D.M. then rebooted. They showed up in D.M. again but still will not read. Any ideas?:confused

 

I did not mention that earlier today, when the CD and dvd roms were working [Earlier today I ran a Live One Care Safety Scanner from MS and it identified some registry entries which were unneeded and suggested I delete them(144 entries). which I did. I'm thinking that has something to do with the problem. ]

Check high/low filters and none were listed. ran the fix you mentioned and it may have resolved the problem. However there is still an issue trying to run the program for my HP Psc 2210 All in one printer. It will not load from the CD I have. It gives message 1:2803 2: Setup Error 3:4:5:6
Also when I drag an open window it leaves sort of trails as it is moved across the screen. In D.M. there are no yellow marks of any kind. Also the CD-RW/DVD and DVD/RW both plat music and read files now.

I am not terribly comfortable flashing the bios. I am not sure what to name the file as it suggests. I think the driver I had listed is 1017-003. But I would try it with a little further explanation of how to do it. I have reloaded windows several times on this unit over the years and never ran into this problem. Is there any other info which would be useful?

 

Update on issues

 

Thanls Halo! Your help is greatly appreciated