compatible case

hi would my computer be compatible with this case?

pentium 3 mobo with 666 MHZ P3 (sorry i don't know the exact mobo name!)
192mb sdram
radeon 9200 se 128mb
dolby 5.1 soundblaster live!
realtek ethernet 10/100 pci card
liteon 12x dvd writer
48x cd rom
80gb maxtor IDE with 8mb buffer
standard floppy disc drive
250W psu.

would that lot be compatible with this new case and psu?

http://www.rlsupplies.co.uk/products/product.asp?id=3345


thanks for any help..

 

Looks good to me, and I would go with the 450 watt PSU that comes supplied

 

ok cheers, well i think i'm going to get that one, i just wanted to make sure it was compatible! might shove in some cathode cold lights too!

 

Hi again ,, just a tip and its your decision of course but i was reading on the cathode tubes the other day, all very pretty but they can fault and I saw some wonderful photos of burnt out rigs, if I can find the site again i will post URL

 

ok cheers i might just use some coloured fans. how can i tell if they will plug into a spare power port, the ones that plug into hard drives etc?

 

Hi .. I assume you mean the 4 wired (red/yellow/2 black) power leads that come from PSU. if you do not have enough available just get a splitter that will give you a male and female connection that is if you have no more room for the small fan to mobo connections.. I have added an extra 4 to my rig , 2 i have drilled in the side panel to accomodate cool air being blown directly onto the HD's .. As long as the PSU is man enough the amount of fans that can be installed via the ''Splitter'' is endless, PS if you go for the 4 wired connectors ask retailer for fans with those.. and i have had a coloured one in for the past 12 months with no problems..

 

ok cheers, i think i've got a spare one that was used for a 2nd hard drive a while ago but upgraded to a maxtor 80gb. if not i'll look for a female and male splitter cheers!