Copy CD-Structure Corrupted and Unreadable

I am attempting to copy a CD to another CD. I have permission from the provider of the original CD. (Disclaimer)
I can burn other files using the same CD/DVD Hardware, Bastiat-The Law, for instance and recommended, without problems.
The original CD reads and operates fine, opens the html pages, active links link etc.
Copied the original CD to HD and no issues there.
I have tried copying using a disk copy utility, Roxio, and Drag & Drop method with same result, Fisk Struc Corr... When I first attempted this I indicated within Roxio that I wanted 10 copies, the software went through typical reading, writing, eject, load new disk etc. I then tested the burn and get the error. After the write, Roxio does indicate that the disk in F is not a blank recordable disk.
I downladed a driver update utility from MG, great resource by the way, and the drivers are current. The hardware is original factory installed Samsung SD-616T DVD and SW-240B CD-R/RW.
I'm reviewing previous posts but thought I throw this out if anyone has an idea while I still have blank CD's available.
Thanks in advance.

 

Maybe copy protection?
Try making an ISO (image) of the CD onto your hard drive.
Then burn the image to another CD using an image burner (DO NOT copy it, it'll just copy the 1 large image(iso) file)

 

Imgburn will do as usasma has advised (assuming no copy protection).

Use the "Create Image File from Disc" option to create an ISO file of the CD on your HD.
Then use the "Write Image File to Disc" option to put the ISO on a blank CD.
Test the new CD to see if it works properly.

If it works then you can go back and change the number of copies when using the "Write Image File to Disc" option. No need to recopy the CD to HD.

 

Worked like a charm folks and I thank you much. Mark this one as satisfied and appreciative.