dvd and usb drive problems

Please help,

I just bought a new dvd burner (liteon) and after installing it as the master and my old cd burner as the slave I cannot see the cd burner as a drive in 'my computer'. Shouldnt it be listed there?
Also I cant seem to be able to burn anything on either drive.

Secondly, I also have a jumpdrive hooked into one of my usp ports. It is not showing up in the 'my computer' menu also.

I can see all of them in 'disk manager' though.

running xp, 1.33 ghz, 512 mb ram

 

Firstly i would go get new drivers then if that fails try swapping the Master/Slave jumper settings not forgetting of course to have them configured correctly on ribbon.

 

thanks for the suggestions.
All drivers are updated. Not totally compitent on the ribbon placements. Right now the master is the DVD rw player and it is hooked into the ribbon port that is closest to motherboard Ide2. The slave is the cd rw and it is hooked into the end port of the ribbon. Sound ok to you?

Could you possibly look over this error log created by the software? I have also submitted this to the Tech support at Nero. Both drives play (read) normally, save from disks, etc. Its just when they attemp to write anything I get a communication failure notiification.

jo
oneals
1A20-0218-0370-1725-8155-4331*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'F:\Program Files\ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS04 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KS04 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD200BB-00AUA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD600LB-55DNA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MSI CD-RW MS-8348 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S E: CDRom0
MSI CD-RW MS-8348 G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 213MB (218276kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.10.2005
Audio CD
5:30:27 PM #1 CDADOC -1 File Cdadoc.cpp, Line 1465
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 03:49.01, Pause frames: 150, Filters: 0, Name: '1 - 10 Psalm 64.wma'.
Track 02: Length: 05:50.61, Pause frames: 150, Filters: 0, Name: '2 - 08 Have Your Way.wma'.
Track 03: Length: 06:15.27, Pause frames: 150, Filters: 0, Name: '3 - 06 I Honor You.wma'.
Track 04: Length: 06:33.72, Pause frames: 150, Filters: 0, Name: '4 - 01 Friend of God.wma'.
Track 05: Length: 05:51.17, Pause frames: 150, Filters: 0, Name: '5 - 02 We Declare War.wma'.
Track 06: Length: 04:23.19, Pause frames: 150, Filters: 0, Name: '6 - 04 Need You.wma'.
Total size: 32:55.47

5:30:27 PM #2 Text 0 File Burncd.cpp, Line 2948
LITE-ON DVDRW SOHW-1693S
Buffer underrun protection activated

5:30:27 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

5:30:27 PM #4 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1693S running

5:30:27 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

5:30:27 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using CD-R/RW media

5:30:27 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 148021 ( 32:55.46)

5:30:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

5:30:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1693S;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

5:30:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:30:27 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (1 - 10 Psalm 64.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 17176 (17176) = #17176/3:49.1
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17176 blocks [LITE-ON DVDRW SOHW-1693S]
1: TRM_AUDIO_NOPRE (2 - 08 Have Your Way.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 26311 (26311) = #26311/5:50.61
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 26311 blocks [LITE-ON DVDRW SOHW-1693S]
2: TRM_AUDIO_NOPRE (3 - 06 I Honor You.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 28152 (28152) = #28152/6:15.27
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 28152 blocks [LITE-ON DVDRW SOHW-1693S]
3: TRM_AUDIO_NOPRE (4 - 01 Friend of God.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 29547 (29547) = #29547/6:33.72
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 29547 blocks [LITE-ON DVDRW SOHW-1693S]
4: TRM_AUDIO_NOPRE (5 - 02 We Declare War.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 26342 (26342) = #26342/5:51.17
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 26342 blocks [LITE-ON DVDRW SOHW-1693S]
5: TRM_AUDIO_NOPRE (6 - 04 Need You.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 19744 (19744) = #19744/4:23.19
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19744 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------

5:30:27 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 6:
1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 40750752, ISRC ""
2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 40750752 41103552 102987024, ISRC ""
3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 102987024 103339824 169553328, ISRC ""
4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 169553328 169906128 239400672, ISRC ""
5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 239400672 239753472 301709856, ISRC ""
6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 301709856 302062656 348500544, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
17176 | 2 | 0 | 0x21 | 0x00
17326 | 2 | 1 | 0x21 | 0x00
43637 | 3 | 0 | 0x21 | 0x00
43787 | 3 | 1 | 0x21 | 0x00
71939 | 4 | 0 | 0x21 | 0x00
72089 | 4 | 1 | 0x21 | 0x00
101636 | 5 | 0 | 0x21 | 0x00
101786 | 5 | 1 | 0x21 | 0x00
128128 | 6 | 0 | 0x21 | 0x00
128278 | 6 | 1 | 0x21 | 0x00
148022 | lead-out | 1 | 0x01 | 0x00

5:30:27 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 48x (7,200 KB/s)

5:30:27 PM #14 SCSI -1189 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03BA6600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02

5:30:27 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:30:27 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #17326

5:30:27 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #43787

5:30:27 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #72089

5:30:27 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #101786

5:30:27 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #128278

5:30:28 PM #21 Text 0 File Mmc.cpp, Line 16922
StartDAO : CD-Text - On

5:30:28 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

5:30:28 PM #23 Text 0 File Mmc.cpp, Line 17211
CueData, Len=112
21 00 00 41 00 00 00 00
21 01 00 00 00 00 00 00
21 01 01 00 00 00 02 00
21 02 00 00 00 03 33 01
21 02 01 00 00 03 35 01
21 03 00 00 00 09 2b 3e
21 03 01 00 00 09 2d 3e
21 04 00 00 00 10 01 0e
21 04 01 00 00 10 03 0e
21 05 00 00 00 16 25 0b
21 05 01 00 00 16 27 0b
21 06 00 00 00 1c 1e 1c
21 06 01 00 00 1c 20 1c
01 aa 01 01 00 20 37 2f

5:31:03 PM #24 SCSI -1024 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x075E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x1B 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03

5:31:03 PM #25 CDR -1024 File Writer.cpp, Line 311
Communication failure

5:31:03 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

5:31:04 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

5:31:13 PM #28 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 48x (7,200 KB/s)

5:31:13 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

5:31:13 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

thanks for your time,

john

 

OK,
now I am getting somewhere. Per your suggestions I actually unattached the cd rw drive from the ide cord. This works, my new DVD drive works and I am currently burning.
BUT, I know it is possible to have both. I wonder what I did wrong with my configuration to create the communication problems.
I know,
check the master - slave setting on both. Then, what is the best way for two drives to be connected to the IDE?

thank,s

 

Ok we are getting somwhere now... you appear to have the ribbon misplaced.. The best way is make one master with jumper settings and this is connected to the END of the ribbon, the second will be slave of course(jumper settings) this will connect to the intermediary/middle connector on ribbon and that should sort your problem ..