GetLogs.bat - no "run as administrator" option

Discussion in 'Malware Help (A Specialist Will Reply)' started by skanuga, Sep 9, 2008.

  1. skanuga

    skanuga Private E-2

    Respected helpers, I have followed the guidelines begining from the "Read and Run me first" thread all the way up till the MGtools application.
    Now I am stuck because when I right click on GetLogs.Bat, there is no option to run. I only see "Open, Edit, Print, Scan using spybot etc all the way till Properties"

    Can someone please tell me, preferable quickly, as I am online right now, what I should do??

    Thanks so much. Big respect to all the helpers out there saving us.

    Suhail
     
    skanuga, Sep 9, 2008
    #1
  2. skanuga

    skanuga Private E-2

    Just thought I should update that I decided to click on open and I did get a screen that looked like the jpeg picture that was posted in the "Using MGtools" thread. I am going to do an online kaspersky scan to see whether all is good. I will get back on whether my problem has been solved or not.

    Regards

    Suhail
     
    skanuga, Sep 9, 2008
    #2
  3. skanuga

    skanuga Private E-2

    Friends, in my last post I mentioned that I will do a kaspersky online scan to see whether the guidelines in the "Read and Run me first" thread helped me or not. Well yes, for the most part, however, 1 threat and 2 infected objects still remain. So please assist me in the removal of this as when it is possible. I will wait with patience until then.

    In the meanwhile I would just like to run through the actions I have taken. The first thing I did was run kaspersky scan.
    This resulted in what I have uploaded as kasscan.txt.
    After this I went to the mcafee forums where I was suggested to run SAS and MAM.
    After running the two programs I did another online scan that resulted in what I have uploaded as kasscan2.txt

    After this, I then logged on to this forums and begun the "Run and Read me first guidelines"

    After running SAS I got the log that I have uploaded as SASlog.txt
     

    Attached Files:

    skanuga, Sep 9, 2008
    #3
  4. skanuga

    skanuga Private E-2

    After this I ran Spybot S&D and it basically detected 3 problems which it subsequently fixed.
    After this I ran MAM exactly the way it was mentioned in the guideline.
    MAM was unable to remove one file which it said it will remove after reboot, but unfortunately did not, as this is the same file that still shows up in the kaspersky online scan.
    The MAM log I have uploaded in the file MAMlog.txt
    Following this I ran combofix and have obtained the log named combofixlog.txt
    Finally I ran MGtools, hopefully, correct, as you can see from my first post, I was a little confused as there was no option for "run as administrator".
    Here is the MGtools log. called MGlogs.zip :) (like you don't know)

    So basically, all this that I have done may be a complete waste of time but since I followed the steps exactly the way the guide suggested I thought I should still post my experiences in any case.

    I will go now and hopefully not post anymore until someone replies. LOL

    Damn cool forum anyway. Keep up the good work. Y'all are helping to make cyber space a better place :)

    Suhail
     

    Attached Files:

    skanuga, Sep 9, 2008
    #4
  5. skanuga

    skanuga Private E-2

    Whoops before I go I thought I should put the final kaspersky scan I did after doing everything mentioned in the "Read and Run me first" thread.
    As y'all can see this bloody cp1041.nls just won't leave me alone :)
     

    Attached Files:

    skanuga, Sep 9, 2008
    #5
  6. chaslang

    chaslang MajorGeeks Admin - Master Malware Expert Staff Member

    Welcome to Major Geeks!

    You were reading the instructions for Vista Users. You have Windows XP.

    The below must be done 100% properly/exactly as written for the fix to have a chance of working!!!!

    Download the attached FixNDIS.zip file to the C:\MGtools folder. Then extract the FixNDIS.bat file from the ZIP file into the C:\MGtools folder. Print the below before continuing so you can refer to it while in safe mode with no browsers or other programs running!!!!!

    Then boot into safe mode and make sure you log into your normal user account that is used in normal boot mode. After booting in safe mode DO NOT RUN anything else but what follows!! Now open Windows Explorer ( Right Click Start and select Explore) then navigate to the C:\MGtools folder and double click the FixNDIS.bat file to run it. This will create a log file named c:\FixND.txt


    NOTE: After running this you will not be able to shutdown or restart your PC in the normal fashion. You will have to hold in the power button on your PC until it powers down.
    • Now close ALL open windows now!!!!!
    • Power down your PC now. Wait about 15 seconds and then power back up.
    • After reboot Attach the c:\FixND.txt file here. Then continue on to the below instructions!
    Now we need to use ComboFix.
    • Make sure that combofix.exe that you downloaded while doing the READ & RUN ME is on your Desktop but Do not run it!
      • If it is not on your Desktop, the below will not work.
    • Open Notepad and copy/paste the text in the below quote box into it:
    • Save the above as CFscript.txt and make sure you save it to the same location (should be on your Desktop) as ComboFix.exe
    • At this point, you MUST EXIT ALL BROWSERS NOW before continuing!
    • You should have both the ComboFix.exe and CFScript.txt icons on your Desktop.
    • Now use your mouse to drag CFscript.txt on top of ComboFix.exe
    • Follow the prompts.
    • When it finishes, a log will be produced named c:\combofix.txt
    • I will ask for this log below
    Note:

    Do not mouseclick combofix's window while it is running. That may cause it to stall.

    Copy the bold text below to notepad. Save it as fixme.reg to your desktop. Be sure the "Save as" type is set to "all files" Once you have saved it double click it and allow it to merge with the registry.
    Make sure that you tell me if you receive a success message about adding the above
    to the registry. If you do not get a success message, it definitely did not work.

    Now run Ccleaner!

    Now run the C:\MGtools\GetLogs.bat file by double clicking on it (Note: if using Vista, don't double click, use right click and select Run As Administrator).


    Then attach the below logs:
    • C:\ComboFix.txt
    • C:\FixND.txt
    • C:\MGlogs.zip
    Make sure you tell me how things are working now!
     

    Attached Files:

    Last edited: Sep 11, 2008
    chaslang, Sep 11, 2008
    #6

MajorGeeks.Com Menu

Downloads All In One Tweaks \ Android \ Anti-Malware \ Anti-Virus \ Appearance \ Backup \ Browsers \ CD\DVD\Blu-Ray \ Covert Ops \ Drive Utilities \ Drivers \ Graphics \ Internet Tools \ Multimedia \ Networking \ Office Tools \ PC Games \ System Tools \ Mac/Apple/Ipad Downloads

Other News: Top Downloads \ News (Tech) \ Off Base (Other Websites News) \ Way Off Base (Offbeat Stories and Pics)

Social: Facebook \ YouTube \ Twitter \ Tumblr \ Pintrest \ RSS Feeds