hijackthis - analysis ?

Hi and Welcome


Hijackthis is just one part of malware removals and as it cannot locate or highligh all malwares its best to run through our guide posted below and follwo the steps, then attach all of the requested logs and our malware experts will be able to assist you in removing the pest if indeed it is malware related.

Have you double checked your connection settings in IE, if using broadband and a network ethernet connection to connect to modem, make sure under Tools > Connection > Lan Settings that Automatically detect settings it ticked.


Our 1st steps standard cleaning procedures which are necessary for us to provide you support. Also there are steps included for installing, running, and posting HijackThis logs as attachments.

• Run ALL the steps in this Sticky thread READ & RUN ME FIRST Before Asking for Support
• Make sure you check version numbers and get all updates.
• Very Important: Make sure you tell us the results from running the tutorial...was anything found? Were you unable to complete any of the scans?...Were you unable to download any of the tools?...Did you do the on-line scans as suggested? etc.

• After doing ALL of the above you still have a problem make sure you have booted to normal mode and run the steps in the below link to properly use HijackThis and attach a log:

Downloading, Installing, and Running HijackThis

Make sure you also rename HijackThis.exe as suggested in the procedures. Use analyse.exe for the new name. This is very important due to some new infections going around.

​

• When you return to make your next post, make sure you attach the following logs and that you have run these scans in the following order too:
  • CounterSpy
  • AVG Antispyware log - ONLY IF NEEDED you were not able to run CounterSpy
  • Bitdefender - from step 6
  • Panda Scan - from step 6
  • runkeys.txt - the log from GetRunKey.bat
  • newfiles.txt - the log from ShowNew.bat
  • HijackThis

NOTE: You can only attach 3 files in a single message so it will require that you use two messages to attach all of these logs!