laptop unuseable because of antivirus pro

Welcome to Major Geeks!

Please download and run the below tool named Rkill (courtesy of BleepingComputer.com) which may help allow other programs to run.
There are 4 different versions. If one of them won't run then download and try to run the other one.

Vista and Win7 users need to right click and choose Run as Administrator

You only need to get one of them to run, not all of them. You may get warnings from your antivirus about this tool, ignore them or shutdown your antivirus.

1. Rkill.exe
2. Rkill.com
3. Rkill.scr
4. Rkill.pif

Once you've gotten one of them to run then try to immediately run the following.


Download and save the below to your PC (save it anywhere you can find it. The Desktop is fine). Then double click on it to run it.

AVPFind.bat

It should take a couple minutes to run. You will see a black command prompt window while it is running and it should close when it is finished. Once it finishes, attach the c:\avplog.txt file that is will hopefully create as long as the malware does not block the batch file from running. (See: HOW TO: Attach Items To Your Post )


Now download and Run exeHelper

• Please download exeHelper to your desktop.
• Double-click on exeHelper.com to run the fix.
• A black window should pop up, press any key to close once the fix is completed.
• A log file named log.txt will be created in the directory where you ran exeHelper.com
• Attach the log.txt file to your next message.

Note: If the window shows a message that says "Error deleting file", please re-run the program before posting a log - and post the two logs together (they will both be in the one file).


Also please try running the below online scan:

http://www.superantispyware.com/onlinescan.html

Reboot immediately after scanning if it finds and removes anything. Let me know if anything was found. See if you can save a log with it.


Then try running these instructions: Using MGtools


Attach the below logs when finished with all of the above:

• C:\avplog.txt - from AVPfind
• a log from online SAS scan if you could make one
• log.txt - from exeHelper
• C:\MGlogs.zip - from MGtools

The C:\ assumes that drive C is you Windows boot drive. If you boot from another drive, then use the correct drive letter above.

 

Now download The Avenger by Swandog46, and save it to your Desktop.

• Extract avenger.exe from the Zip file and save it to your desktop
• Run avenger.exe by double-clicking on it.
• Do not change any check box options!!
• Copy everything in the Quote box below, and paste it into the Input script here: part of the window:

• Now click the Execute button.
• Click Yes to the prompt to confirm you want to execute.
• Click Yes to the Reboot now? question that will appear when Avenger finishes running.
• Your PC should reboot, if not, reboot it yourself.
• A log file from Avenger will be produced at C:\avenger.txt and it will popup for you to view when you login after reboot.

• Now please save Win32kDiag file to your desktop.
• Click on Start->Run, and copy-paste the following command (the bolded text) into the "Open" box, and click OK. When it's finished, there will be a log called Win32kDiag.txt on your desktop. Please attach this log

"%userprofile%\desktop\win32kdiag.exe" -f -r



Now download the current version of MGtools and save it to your root folder. Overwrite your previous MGtools.exe file with this one.

Run MGtools.exe ( Note: If using Vista make sure UAC is still disabled. Also don't double click on it, use right click and select Run As Administrator )


Then attach the below logs:

• C:\avenger.txt
• the Win32kdiag.txt log
• C:\MGlogs.zip

Make sure you tell me how things are working now!

 

Looking better.




Now download Junction,zip to your Windows folder

• Please download Junction.zip and save it to your Windows folder (i.e, C:\Windows\Junction.zip This assumes C:\ is your Windows boot drive.)
• Now unzip it and put junction.exeinto the Windows folder (i.e., C:\Windows\junction.exe)
• Do not try to run it right now. We will run something that uses it later.

Now we need to reset the permissions altered by the malware on some files.

• Download and save inhertit.exe to your Desktop: Inherit.exe
• It must be in your Desktop or the below fix will not work!

Now run the C:\MGtools\FixPerm.bat file by double clicking on it (Note: if using Vista, don't double click, use right click and select Run As Administrator).

• A command prompt window opens and also a license agreement from SysInternals will appear for Junction.
• Accept the license agreement and the scan will begin.
• Wait until it finishes we can take a while to run since it scans your whole harddisk. e patient and don't do anything else while it is scanning.
• The command prompt window should close when it finishes.
• While this is running, you will get several/many popups that have a title Finish and say OK. Just click the OK button each time. This is an indication that it has found a file and has attempted to fix permissions. Depending on how many files that need to be fixed, you could get only a few or many of these popups.

Now run the below to scans and attach the requested logs from SUPERAntiSpyware and Malwarebytes:

SUPERAntiSpyware - running & getting a log

Using Malwarebytes Anti-Malware



Now run the C:\MGtools\GetLogs.bat file by double clicking on it (Note: if using Vista, don't double click, use right click and select Run As Administrator).

Then attach the below logs:

• the SUPERAntiSpyware and Malwarebytes logs
• C:\MGlogs.zip

Make sure you tell me how things are working now!

 

You're welcome.

Yes and there is still a lot more to remove since you were so badly infected. And we need to cleanup left overs from incomplete uninstalls of AVG and Symantec too.

What is the below supposed to be? Is it necessary?
O4 - HKLM\..\Run: [AOL_Demo] C:\Applications\Tool\AOL Demo\DSGDemo.exe


Uninstall the below old versions of software:
J2SE Runtime Environment 5.0 Update 12
Java(TM) 6 Update 2
Java(TM) 6 Update 3
Java(TM) 6 Update 5
Java(TM) 6 Update 7
LiveUpdate 3.1 (Symantec Corporation)

Run C:\MGtools\analyse.exe by double clicking on it (Note: if using Vista, don't double click, use right click and select Run As Administrator). This is really HijackThis (select Do a system scan only) and select the following lines but DO NOT CLICK FIX until you exit all browser sessions including the one you are reading in right now:

R3 - URLSearchHook: AVG Security Toolbar BHO - {A3BC75A2-1F87-4686-AA43-5347D756017C} - C:\Program Files\AVG\AVG8\Toolbar\IEToolbar.dll (file missing)
R3 - URLSearchHook: (no name) - *{CFBFAE00-17A6-11D0-99CB-00C04FD64497} - (no file)
O2 - BHO: (no name) - {5C255C8A-E604-49b4-9D64-90988571CECB} - (no file)
O2 - BHO: AVG Security Toolbar BHO - {A3BC75A2-1F87-4686-AA43-5347D756017C} - C:\Program Files\AVG\AVG8\Toolbar\IEToolbar.dll (file missing)
O3 - Toolbar: AVG Security Toolbar - {CCC7A320-B3CA-4199-B1A6-9F516DD69829} - C:\Program Files\AVG\AVG8\Toolbar\IEToolbar.dll (file missing)
O4 - HKLM\..\Run: [UserFaultCheck] %systemroot%\system32\dumprep 0 -u
O4 - HKLM\..\Run: [Oyepuharuculihi] rundll32.exe "C:\WINDOWS\ojuvohiyesupaho.dll",Startup
O23 - Service: AVG8 E-mail Scanner (avg8emc) - Unknown owner - C:\PROGRA~1\AVG\AVG8\avgemc.exe (file missing)
O23 - Service: AVG8 WatchDog (avg8wd) - Unknown owner - C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe (file missing)

After clicking Fix, exit HJT.

Now download The Avenger by Swandog46, and save it to your Desktop.

• Extract avenger.exe from the Zip file and save it to your desktop
• Run avenger.exe by double-clicking on it.
• Do not change any check box options!!
• Copy everything in the Quote box below, and paste it into the Input script here: part of the window:

• Now click the Execute button.
• Click Yes to the prompt to confirm you want to execute.
• Click Yes to the Reboot now? question that will appear when Avenger finishes running.
• Your PC should reboot, if not, reboot it yourself.
• A log file from Avenger will be produced at C:\avenger.txt and it will popup for you to view when you login after reboot.

After reboot, now install the current version of Sun Java from: Sun Java Runtime Environment

Please run the below then reboot. After reboot run it one more time.

Norton Removal Tool (SymNRT)

Now see if you can run ComboFix as requested in the READ & RUN ME

Now run Ccleaner. Only use the Run Cleaner button. Do not run anything else on any other forms.

Now run the C:\MGtools\GetLogs.bat file by double clicking on it (Note: if using Vista, don't double click, use right click and select Run As Administrator).

Then attach the below logs:

• C:\avenger.txt
• C:\combofix.txt if ComboFix ran
• C:\MGlogs.zip

Make sure you tell me how things are working now!

 

Just a common problem with ComboFix. It has some difficulties in this area and frequently detects running protection software that is not installed. Ignore it.

We have a little more to do.


Now we need to use ComboFix

• Make sure that combofix.exe that you downloaded while doing the READ & RUN ME is on your Desktop but Do not run it!
  • If it is not on your Desktop, the below will not work.
• Also make sure you have shut down all protection software (antivirus, antispyware...etc) or they may get in the way of allowing ComboFix to run properly.
• If ComboFix tells you it has expired or need to be updated to a new version, make sure you allow it to update.
• Open Notepad and copy/paste the text in the below quote box into it:

• Save the above as CFscript.txt and make sure you save it to the same location (should be on your Desktop) as ComboFix.exe
• At this point, you MUST EXIT ALL BROWSERS NOW before continuing!
• You should have both the ComboFix.exe and CFScript.txt icons on your Desktop.
• Now use your mouse to drag CFscript.txt on top of ComboFix.exe
• Follow the prompts.
• When it finishes, a log will be produced named c:\combofix.txt
• I will ask for this log below

Note:

Do not mouseclick combofix's window while it is running. That may cause it to stall.

Now run Ccleaner. Only use the Run Cleaner button. Do not run anything else on any other forms.

Now run the C:\MGtools\GetLogs.bat file by double clicking on it (Note: if using Vista, don't double click, use right click and select Run As Administrator).

Then attach the below logs:

• C:\ComboFix.txt

Make sure you tell me how things are working now!

 

You're logs are clean.

If you are not having any other malware problems, it is time to do our final steps:

1. We recommend you keep SUPERAntiSpyware and Malwarebytes Anti-Malware for scanning/removal of malware. Unless you purchase them, they provide no protection. They do not use any significant amount of resources ( except a little disk space ) until you run a scan.
3. If we had you use ComboFix, uninstall ComboFix (This uninstall will only work as written if you installed ComboFix on your Desktop like we requested.)
   • Click START then RUN and enter the below into the run box and then click OK. Note the quotes are required
   • "%userprofile%\Desktop\combofix" /uninstall
     • Notes: The space between the combofix" and the /uninstall, it must be there.
     • This will uninstall ComboFix and also reset hidden files and folders settings back to Windows defaults.
4. Any other miscellaneous tools we may have had you install or download can be uninstalled and deleted.
5. If we had you download any registry patches like fixme.reg or fixWLK.reg (or any others), you can delete these files now.
6. If running Vista, it is time to make sure you have reenabled UAC by double clicking on the C:\MGtools\enableUAC.reg file and allowing it to be added to the registry.
7. Go to add/remove programs and uninstall HijackThis.
8. Goto the C:\MGtools folder and find the MGclean.bat file. Double click on this file to run this cleanup program that will remove files and folders related to MGtools and some other items from our cleaning procedures.
9. If you are running Vista, Windows XP or Windows ME, do the below:
   • Refer to the cleaning procedures pointed to by step 6 of the READ ME for your Window version and see the instructions to Disable System Restore which will flush your Restore Points.
   • Then reboot and Enable System Restore to create a new clean Restore Point.
10. After doing the above, you should work thru the below link:
    • How to Protect yourself from malware!

 

You're welcome. Surf safely!