new and in need of help

Discussion in 'Software' started by lonelyone81, Aug 20, 2007.

  1. lonelyone81

    lonelyone81 Private E-2

    ok look I have an emachine and the HDD got wiped and the restore disk that came with this thing only has the os on it! now I am haveing a problem with getting the right drivers for it! I have went to there web site and downloaded the mobo, and chipset drivers. I have also installed the audio, video drivers.Howere the chipset driver will not install how do I install it my self?:cry
     
  2. DavidGP

    DavidGP MajorGeeks Forum Administrator - Grand Pooh-Bah Staff Member

  3. lonelyone81

    lonelyone81 Private E-2

    Frist let me say thank you for your reply;)

    I have a emachine W3503 The Mobo is a Intel D101GGC (Grant County)

    Processor
    • Support for an Intel® Pentium® D Processor in an LGA775 socket with an 800 MHz system bus
    • Support for an Intel® Pentium® 4 Processor in an LGA775 socket with an 800 or 533 MHz system bus
    • Support for an Intel® Celeron® D Processor in an LGA775 socket with a 533 MHz system bus

    Chipset
    ATI Radeon Xpress 200 Chipset

    Memory
    • Two DDR SDRAM Dual Inline Memory Module (DIMM) sockets
    • Support for DDR 400 MHz and DDR 333 MHz DIMMs
    • Support for up to 2 GB of system memory

    Audio
    High Definition Audio subsystem using the Realtek ALC861 audio codec

    Onboard I/O Connectors
    SMSC SCH5017 Legacy I/O controller for hardware management, diskette drive, serial, parallel, and PS/2 ports

    Peripheral Interface
    -Eight USB ports
    -One serial port
    -One parallel port
    -Four Serial ATA interfaces
    -One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support
    -One diskette drive interface
    -PS/2 keyboard and mouse ports

    Expansion Slots
    • Two PCI Conventional* bus add-in card connectors (SMBus routed to PCI Conventional bus connector 2)
    • One PCI Express x1 bus add-in card connector
    • One PCI Express x16 bus add-in card connector

    BIOS
    -AwardBIOS for Intel resident in the 4 Mbit FWH

    Onboard LAN
    10/100 Mbits/sec LAN subsystem using the Realtek 8101L LAN adapter device

    Video
    Integrated ATI Radeon* X300 based graphics

    Form Factor
    microATX (9.60 inches by 8.60 inches [243.84 mm by 218.44 mm])


    I am not sure what any of this means however this is the web site that the tec-support gave me.

    http://www.emachine-upgraders.info/dir1/motherboards/socket775/D101GGC.shtml

    It is were I got this info.
     
  4. DavidGP

    DavidGP MajorGeeks Forum Administrator - Grand Pooh-Bah Staff Member


MajorGeeks.Com Menu

Downloads All In One Tweaks \ Android \ Anti-Malware \ Anti-Virus \ Appearance \ Backup \ Browsers \ CD\DVD\Blu-Ray \ Covert Ops \ Drive Utilities \ Drivers \ Graphics \ Internet Tools \ Multimedia \ Networking \ Office Tools \ PC Games \ System Tools \ Mac/Apple/Ipad Downloads

Other News: Top Downloads \ News (Tech) \ Off Base (Other Websites News) \ Way Off Base (Offbeat Stories and Pics)

Social: Facebook \ YouTube \ Twitter \ Tumblr \ Pintrest \ RSS Feeds