New SSD is not detected by Windows installer

Hi. I already tried this:
-> list disk
-> select disk 0
-> clean
It says that it is clean now.
Still Windows 7 installation says that it can not find the driver. I made sure the SSD with AHCI is shown on BIOS. In other words, BIOS sees the SSD but Windows 7 does not install since it can't see the SSD. Partition Manager 9 also can not detect it. Model: OCZ Vector 128 GB.

 

Howdy Skitter and welcome to MG :cool
I had a similar problem with an OCZ Petrol about 3 or 4 months ago and OCZ couldn't fix it (even with new firmware) and so after trying another 3 OCZ Petrol drives I ended up exchanging it for a Corsair SSD. Make sure you have the latest version for your mobo BIOS and after contacting OCZ Tech Support they may request you update the SSD firmware. I had to update it using Linux as the Windows updater OCZ sent me wouldn't work with Windows 7 (hopefully they have rectified this situation by now).
I don't know where you are located so here is a link for OCZ global tech support and RMA. If you can't get another brand when you exchange the drive the OCZ Vertex series seem to be quite reliable and don't have any issues.
I hope this helps :wave

 

Thank you. I did not expect that there will be so many problems with the SSD :|. I also tried to create a new partition with the diskpart. Well I did it, I also formatted it with FS=NTFS parameter and set the partition to active. Still it is not recognized by Windows nor Partition Manager. I will have to contact with the support.