Opinions on hardware I have chosen

Here is a list of hardware I have been looking into , with a bugetary constraint of 300-350 pounds.

http://www.ebuyer.com/customer/products/index.html?product_uid=114742 x1

http://www.ebuyer.com/customer/products/index.html?product_uid=119481

http://www.ebuyer.com/customer/products/index.html?product_uid=107617

http://www.ebuyer.com/customer/products/index.html?product_uid=113698

http://www.ebuyer.com/customer/products/index.html?product_uid=116150

http://www.ebuyer.com/customer/products/index.html?product_uid=105805

Basically , I want various opinions from people with more knowledge on the subject than me.

I will be using the computer for my job as well as for playing games , such as WoW and Starcraft ( I wish for both of these to run smoothly )

I may even look into some more graphically intensive games ; and I wish for these to play on my system at , at least medium spec.

Basically , if any of the hardware above is not recommended, or there is something there sticking out like a soar thumb , I would like it to be pointed out.


Thankyou in advance.

- Ryan.

Edit ; I should also point out that all the hardware should ideally come from that site , also , if there is a place where I can get specific hardware from at a cheaper price - point me in the right direction.

I have also been told I would be better off getting a single core processor , which is more powerful for the same price. Is that a better idea with this setup?

Also would it per chance run a game such as the new morrowind? ( incredibly graphicly intensive , but on lower setting )


...too many questions.

 

Not sure why a new mobo would have support for AGP
more likely to want multiple PCI-E x16 slots for SLI

Also has 2x DDRII DIMMS
and
2x DDR DIMMS
you can use either, but cannot use both at the same time
you will be limited to a total of 2GB of either DDR or DDRII

to achieve dual channel you need to instal matching RAM
same brand,speed,size & chip type.
not sure if you were planning on getting a matched pair of the 1GB DDRII
or just one ?

the case comes with a 350 Watt PSU
you will need to check to see if that is going to be enough

PS: you would be more likely to get more replies to this post if you list the part names / model numbers instead of just the links

 

I should also ask you to explain in laymens terms ; I have above average knowledge about this subject than the average person , but I'm still confused by some of the stuff from the post above.

I guess my main concern is the processor , and if the parts would work well together .

Also concerning shanemails post , I will list the parts as names instead of links;

• MotherBoard - ASRock 775DUAL-VSTA SKT 775 VIA PT880Pro/ultra with conroe support AGP PCI-E 7.1 channel audio ATX
• Ram - OCZ (OCZ25331024V) 1GB DDR2-533 PC2-4200 Value Series Lifetime Warranty
• Processor - Intel (BX80551PE2666FN) Pentium D 805 Dual Core 64 bit LGA 775 2 x 2.66 GHz 2MB (1 Mb per Core) Cache
• Harddrive - Seagate ST3250820A 250GB Barracuda 7200RPM ATA/100 8MB - OEM
• Graphics Card - Sapphire ATI Radeon X1650 Pro 256MB GDDR3 Dual DVI-I TVO PCI-E

My two main worries are the graphics card and processor , but if you can spot something else that would be a problem - please point it out.

 

I don't see anything that leaps right out and says that these items won't work together.