Please help with Malware/Virus Removal

http://img827.imageshack.us/img827/1263/frst.gif For 32-bit (x86) systems download Farbar Recovery Scan Tool and save it to a flash drive.
For 64-bit (x64) systems download Farbar Recovery Scan Tool x64 and save it to a flash drive.

Plug the flashdrive into the infected PC.

Enter System Recovery Options.

To enter System Recovery Options from the Advanced Boot Options:

• Restart the computer.
• As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.
• Use the arrow keys to select the Repair your computer menu item.
• Choose your language settings, and then click Next.
• Select the operating system you want to repair, and then click Next.
• Select your user account and click Next.

To enter System Recovery Options by using Windows installation disc:

• Insert the installation disc.
• Restart your computer.
• If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings.
• Click Repair your computer.
• Choose your language settings, and then click Next.
• Select the operating system you want to repair, and then click Next.
• Select your user account an click Next.

On the System Recovery Options menu you will get the following options:

• Select Command Prompt
• In the command window type in notepad and press Enter.
• The notepad opens. Under File menu select Open.
• Select "Computer" and find your flash drive letter and close the notepad.
• In the command window type e:\frst.exe (for x64 bit version type e:\frst64) and press Enter
• Note: Replace letter e with the drive letter of your flash drive.
• The tool will start to run.
• When the tool opens click Yes to disclaimer.
• Press Scan button.
• It will make a log (FRST.txt) on the flash drive. Please attach this log to your next reply. (How to attach)

 

NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system

Attached is fixlist.txt

• Save fixlist.txt to your flash drive.
• You should now have both fixlist.txt and FRST64.exe on your flash drive.

Now re-enter System Recovery Options.
Run FRST64 and press the Fix button just once and wait.
The tool will make a log on the flashdrive (Fixlog.txt).
Please attach this to your next message. (How to attach)

Now attempt to boot normally.

-------------------------------

• Now re-run RogueKiller - no fix just a scan and attach the log.
• Re-run FRST - no fix, just a scan and attach the log.
• Let me know how things are running at this point.

 

http://img805.imageshack.us/img805/9659/rktigzy.gif Fix items using RogueKiller.

Double-click RogueKiller.exe to run. (Vista/7 right-click and select Run as Administrator)
When it opens, press the Scan button
Now click the Registry tab and locate this 1 detection:

• [ZeroAccess] HKCR\[...]\InprocServer32 : (C:\Users\Dsouzas\AppData\Local\{ad82b346-31f1-fa04-cce2-96d631b19fc8}\n.) -> FOUND

Place a checkmark each of these items, leave the others unchecked.
Now press the Delete button.
When it is finished, there will be a log on your desktop called: RKreport[2].txt
Attach RKreport[2].txt to your next message. (How to attach)
Do not reboot your computer yet.


Download Windows Repair by Tweaking.com and unzip the contents into a newly created folder on your desktop.

• Now run Repair_Windows.exe by double clicking on it ( if you are running Vista or Win 7, use right click and select Run As Administrator)
• Now select the Start Repairs tab.
• The click the Start button.
• Create a System Restore point if prompted.
• On the next screen, click the Unselect All button to first deselect all repairs.
• Now select the following repair options:
  • Reset Registry Permissions
  • Reset File Permissions
  • Register System Files
  • Repair WMI
  • Repair Windows Firewall
  • Remove Policies Set By Infections
  • Repair Winsock & DNS Cache
  • Repair Proxy Settings
  • Repair Windows Updates
  • Set Windows Services To Default Startup
• Now on the lower right side check the box to Restart/Shutdown System When Finished
• Then make sure the Restart System radio button is enabled.
• Shutdown any other programs that you are running now before continuing.
• Now click the Start button.
• Be patient while the tool repairs the selected items.
• It should reboot automatically when finished.

Re run RogueKiller, just a scan and attach log.

After reboot, check to see if your firewall and security center is working.

 

http://img97.imageshack.us/img97/8120/fss.gif Please download Farbar Service Scanner and run it on the computer with the issue.

• Make sure all the options are checked
• Press Scan.
• It will create a log (FSS.txt) in the same directory the tool was run.
• Please attach FSS.txt to your next message. (How to attach)

 

Hello there. Let's see if this works.

Download this file to your desktop, BITS.reg double click it and allow it to merge with the registry. You should recieve a success message. Let me know.

Reboot the machine. Now run FSS again as per you did before. (Instructions post # 9) Attach log.

 

Download the below to your desktop BFE.reg
Double click it to allow it to merge with the registry and let me know whether or not you recieve a success message. Reboot the machine.
Is Windows Defender ok now?

 

Now run the C:\MGtools\GetLogs.bat file by double clicking on it. (Right click and run as admin if using Vista or Windows7) Then attach the new C:\MGlogs.zip file that will be created by running this.

 

Then rerun MGTools.exe and attach the resulting mglogs.zip please.

 

Click on start > type in services.msc which will bring up a list of services. I want you to tell me what the status says for Windows Defender and also the startup type. If it is stopped, what happens when you click on restart the service?

 

• Click start > type gpedit.msc and hit enter.
• Navigate to the following location Local Computer Policy > Administrative Templates > Windows Components > Windows Defender
• Click on Windows Defender in the pane on the left, on the right you should get all the Group Policies. Look for "Turn off Windows Defender" Double click on it which should bring up another window, allowing you to "Enable" it. Try that and let me know what happens.

 

I shall seek advice. Hang in there.

 

Hello. I have consulted Chaslang who says:

 

If you are not having any other malware problems, it is time to do our final steps:

1. We recommend you keep SUPERAntiSpyware and Malwarebytes Anti-Malware for scanning/removal of malware. Unless you purchase them, they provide no protection. They do not use any significant amount of resources ( except a little disk space ) until you run a scan.
2. If we had you use ComboFix, uninstall ComboFix (This uninstall will only work as written if you installed ComboFix on your Desktop like we requested.)
   • Click START then RUN and enter the below into the run box and then click OK. Note the quotes are required
   • "%userprofile%\Desktop\combofix" /uninstall
     • Notes: The space between the combofix" and the /uninstall, it must be there.
     • This will uninstall ComboFix and also reset hidden files and folders settings back to Windows defaults.
3. Go back to step 6 of the READ ME and renable your Disk Emulation software with Defogger if you had disabled it.
4. Any other miscellaneous tools we may have had you install or download can be uninstalled and deleted.
5. If we had you download any registry patches like fixme.reg or fixWLK.reg (or any others), you can delete these files now.
6. If running Vista, it is time to make sure you have reenabled UAC by double clicking on the C:\MGtools\enableUAC.reg file and allowing it to be added to the registry.
7. Go to add/remove programs and uninstall HijackThis.
8. Goto the C:\MGtools folder and find the MGclean.bat file. Double click on this file to run this cleanup program that will remove files and folders
   related to MGtools and some other items from our cleaning procedures.
9. If you are running Win 7, Vista, Windows XP or Windows ME, do the below:
   • Refer to the cleaning procedures pointed to by step 7 of the READ ME
     for your Window version and see the instructions to Disable System Restore which will flush your Restore Points.
   • Then reboot and Enable System Restore to create a new clean Restore Point.
10. After doing the above, you should work thru the below link:
    • How to Protect yourself from malware!