Replacing Fuser Film Sleeve on a HP 2012 laser

Edit: The printer is an HP 1012 not a 2012. Sorry, typo.

My 1012 is 'ghosting'. It has been for over a year (I just stopped using it and use another printer now). But I miss the laser.

I know I replaced the toner cartridge a year ago but that provided little, if any, improvement.

In nosing around, it seems like it may be the fuser. A new fuser isn't cost feasible but I did see where you can replace the fuser film sleeve for under $20 (maybe even less if you shop around). Worth a try for me.

There is an instructional diy on youtube for this specific repair..I just wondered if anyone has tried this and regretted it. There are quite a few parts to remove but it seems do-able if you take you time and don't get ahead of yourself.

http://www.brokenprinter.com/fuser-film-sleeve-hp-laserjet-1010-1012-1015-1018-1020-1022/

Also, the new film requires a specific grease. Just wondered if this grease is something I might have around the house but known by some other name.

Thanks

Brian

 

OK. The grease is pretty much specific to printers. I found some on-line at a good price..or included with the film.