SMCWBR14S-N2 wireless router setting problems

I am having problem with connecting my 2 PC's to the network at the same time. PC 1 is connected with cable and PC 2 is with that wireless USB thing provided with the router. I can only access one PC at a time to the network. Also, "Online" and "WLAN" LEDs are not burning. I'm hoping that someone can help me adjusting my router settings Sorry, my english is not very good but I hope you understand what I want to say

My router's current settings: INTERNET GATEWAY INFORMATION

WAN IP: 0.0.0.0 IP Address: 192.168.2.1 Number of DHCP Clients: 1
Subnet Mask: 0.0.0.0 Subnet Mask: 255.255.255.0
Gateway: 0.0.0.0 DHCP Server: Enabled
Primary DNS: 0.0.0.0 Firewall: Enabled
Secondary DNS: 0.0.0.0 UPnP: Enabled
Wireless: Enabled

 

My router settings, if it helps:

INTERNET:: WAN IP: 0.0.0.0
Subnet Mask: 0.0.0.0
Gateway: 0.0.0.0
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0

GATEWAY:: IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
DHCP Server: Enabled
Firewall: Enabled
UPnP: Enabled
Wireless: Enabled

INFORMATION:: Number of DHCP Clients: 1

 

Hi kapimaa and welcome to Majorgeeks forums

PC2 (with the wireless USB thing ), is the USB wireless dongle installed correctly? Check in Windows Device Manager.

If there are no problems listed in Device Manager, set the USB dongle to use 192.168.2.1 as the Gateway, DHCP server and Primary DNS.

From PC1, type 192.168.2.1 into your web browser and log into your router, check that wireless is turned on.

Report back please.

 

Yes, wireless is turned on from the router settings. USB wireless thing also fully working because I can access my home network if the other PC is not connected. I think my router setting are wrong orsth :confused

 

Access your home network or access the Internet?

 

I can access the Internet, yea sorry about that

 

So, does anybody have any idea what could be the problem?

 

hi,i think u must to reset it,,and on second pc take a new wireless connection..i had a similar problem ...