Using ImageBurn to Burn an ISO image

Please download the latest version of ImgBurn from here, saving it where you can easily locate it, perferably to your "Downloads" folder.

• Now install ImgBurn to it's default directory - then run it.
• Leave the default settings on the "Choose Components" window and click Next - repeat this selection twice more.
  http://img204.imageshack.us/img204/9060/imgburnsetup1.th.jpg
• Close the web browser window that opens and click Finish to complete the install.

Insert a blank CD/DVD into your burner

• Click on the Write Image file to disc option
  http://img846.imageshack.us/img846/6163/writeimage2.th.jpg
• In the next window under the Source section, click on the highlighted icon shown below and navigate to the image to be burned.
  http://img836.imageshack.us/img836/120/burnsourceiso3.th.jpg
• Now - in the pane on the right, pull the scroll bar to the bottom to view and select Write Speed and the number of Copies to be burnt. NOTE: Be sure to move the ImgBurn Log window away / down far enough to see these setting options. As shown in the following image, we recommend the lowest burning speed supported by your equipment.
• Then left-click the "Write" radio icon also shown highlighted.
  http://img545.imageshack.us/img545/5521/selectsettings3.th.jpg
• The below window will appear when the operation is completed - then remove the disc and close the ImgBurn program.
  http://img694.imageshack.us/img694/1787/operationcompleted4.th.jpg

[ The above is based on source material provided by dr.moriarty - thanks doc ]